Samsung SGH A701 User Manual

* Depending on the software installed or your service provider or country, some of the descriptions in

this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear different from the illustrations

in this guide.

Printed in Korea

Code No.:GH68-12549A

English (AUS). 09/2006. Rev. 1.0

World Wide Web

http://www.samsungmobile.com

Use road safety at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Switch off in an aircraft

Wireless phones can cause interference. Using

them in an aircraft is both illegal and dangerous.

Important

safety

Switch off the phone near all medical

equipment

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules

in force.

precautions

Failure to comply with the following

precautions may be dangerous or illegal.

Interference

All wireless phones may be subject to interference,

which could affect their performance.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any

area and always switch off your phone

whenever it is forbidden to use it, or when it

may cause interference or danger.

Use only Samsung-approved batteries and

accessories, such as headsets and PC data

cables. Use of any unauthorised accessories

could damage you or your phone and may be

dangerous.

Water resistance

Your phone is not water-resistant. Keep it dry.

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Sensible use

Use only in the normal position (held to the

ear). Avoid unnecessary contact with the

antenna when the phone is switched on.

At very high volumes, prolonged listening

to a headset can damage your hearing.

Emergency calls

Key in the emergency number for your present

location, then press

Qualified service

Only qualified service personnel may repair

your phone.

Keep your phone away from small children

Keep the phone and all its parts, including

accessories, out of the reach of small children.

For more detailed safety information, see

"Health and safety information" on page 128.

• 3G

Your phone is capable of

operating in a 3G environment,

allowing much greater data

transfer speed, video streaming,

and video conferencing.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To

quickly learn the basics for your phone, please refer

to “Get started” and “Step outside the phone.”

In this guide, the following instruction icons

appear:

Special

features of your phone

Indicates that you need to pay careful attention

to the subsequent information regarding safety

or phone features.

• Camera and camcorder

Use the camera module on your

phone to take a photo

ꢀ

Indicates that you can get more information on

the referenced page.

or record a video.

→

Indicates that you need to press the Navigation

keys to scroll to the specified option and then

select it.

• Media player

Play media files on your phone.

You can enjoy high quality videos

and music.

[

]

Indicates a key on the phone.

For example, [

]

Indicates a soft key, whose function is displayed

on the phone screen. For example, <Menu

• Digital data printing

Print images, messages, and

personal data directly from y3our

phone.

• Multimedia Message Service

(MMS)

Send and receive MMS

messages with a combination of

text, images, video, and audio.

• Bluetooth

Transfer media files and personal

data and connect to other devices

using free, wireless Bluetooth

technology.

• E-mail

Send and receive e-mails

with image, video, and

audio attachments.

• File viewer

Open documents in various

formats on the phone without

corruption.

• Java

Enjoy Java

™-based embedded

games and download new

games.

• Web browser

Access the wireless web to get

up-to-the-minute information

and a wide variety of media

content.

Browse the web ........................................... 21

Use Contacts ............................................... 21

Send messages............................................ 23

View messages ............................................ 25

Use Bluetooth .............................................. 27

Switch applications....................................... 28

Use a memory card ...................................... 29

Contents

Unpack

Make sure you have each item

Your phone

Keys, features, and locations

Enter text

Get started

ABC, T9, Number, and Symbol modes

First steps to operating your phone

Call functions

Install and charge the phone........................... 7

Power on or off.............................................. 9

Keys and display............................................ 9

Access menu functions .................................. 13

Customise your phone................................... 14

Make/Answer calls ........................................ 17

Advanced calling features

Menu functions

All menu options listed

Solve problems

126

Step outside the phone

Help and personal needs

Begin with your camera, the media player, the web,

and other special features

Health and safety information

128

138

Index

Use the camera ............................................ 18

Play media files ............................................ 19

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

Call log

p. 40

Internet (continued)

Messages (continued)

Applications

p. 102

Missed calls

Dialled calls

Received calls

Current contacts

Delete all

p. 40

p. 41

p. 42

p. 43

Bookmarks

Saved pages

History

p. 55

Delete all

p. 72

PocketNews¹

Voice recorder

World clock

Calculator

p. 102

p. 104

p. 105

p. 55

p. 56

p. 57

Settings

p. 72

p. 78

Memory status

Advanced

Organiser

p. 79

Browser settings

Converter

Data calls

Calendar

p. 79

p. 83

p. 84

My Place

p. 57

Alarms

p. 106

Calls cost¹

Calls time

Week view

Today’s events

Schedule

BigPond

FOXTEL

p. 57

p. 58

p. 59

Settings

p. 107

Contacts

p. 43

Anniversary

Task

Memo

Missed event alarm

Memory status

Profiles

p. 107

p. 109

p. 110

p. 111

p. 113

p. 116

p. 122

p. 123

p. 125

Search contact

New contact

Groups

Speed dial

My name card

Copy all

p. 43

p. 45

p. 46

p. 47

p. 48

p. 49

Time & date

Phone

Music

Downloads

Photos

Display

Call

Maps

Camera

p. 84

Connectivity

Application settings

Security

My Account

Own number

Service number¹

Settings

Messages

p. 59

File manager

p. 91

Memory status

Reset settings

Create new

Inbox

Drafts

Outbox

Sent box

Email inbox

Templates

Broadcast

p. 59

p. 64

p. 67

p. 68

p. 69

p. 70

p. 72

Memory status

Images

p. 92

p. 94

p. 95

p. 96

p. 98

p. 99

p. 101

Videos

Media player

p. 49

1. Available only if supported by

your USIM/SIM card.

2. Available only if a memory

card is inserted.

Music

Sounds

Games & More

Other files

Memory card²

Internet

p. 53

BigPond Home

Enter URL

p. 53

p. 55

Unpack

Make sure you have each item

Your phone

Keys, features, and locations

Exteriorcamera

lens

Memory card slot

External display

Camera key

Media player

control key

•

Phone

Travel Adapter

Battery

PC Data Cable

PC Link CD

User’s Guide

Earpiece

Main display

Navigation keys

(Up/Down/Left/

Right)

You can obtain various

accessories from your local

Samsung dealer.

Interior camera lens

Confirm key

Left soft key

Headset/

Adapter jack

Right soft key

Application switch key

The items supplied with

your phone and the

accessories at your

Samsung dealer may

vary, depending on your

country or service

provider.

Video call key

Power on/off/Menu exit key

Delete/Cancel key

Volume keys

Dial key

Alphanumeric keys

Microphone

Special function

keys

Get started

First steps to operating your phone

Insert the USIM/

SIM card.

USIM/SIM card information

When you subscribe to a cellular network, you

receive a plug-in SIM (Subscriber Identity

Module) card loaded with your subscription

details, such as your PIN, and available optional

services. For 3G services, you can purchase a

USIM (Universal Subscriber Identity Module)

card.

Make sure that the

gold-coloured

contacts on the card

are face down.

Install the battery.

Install and charge the phone

Remove the battery

cover.

If the phone is

already on, first turn

it off by pressing and

holding [

Get started

Reattach the

battery cover.

Remove the adapter

from the phone.

Plug the adapter

into a standard AC

wall outlet.

Low battery indicator

When the battery is low:

•

a warning tone sounds,

the battery low message displays, and

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Plug the adapter into a standard AC wall

outlet.

When the phone is completely charged (the

battery icon becomes still), unplug the

adapter from the power outlet.

Power on or off

Keys and display

Keys

Switch on

1. Open the phone.

Perform the function indicated on

the bottom line of the display.

2. Press and hold [ ].

Make a video call.

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN

and press <Confirm>.

Open the application switch window

to access other applications without

exiting the current application.

use is prohibited.

In Idle mode, access your favourite

menus directly.ꢀp. 110

Switch off

1. Open the phone.

In Menu mode, scroll through menu

options.

2. Press and hold [ ].

In Idle mode, access the My Place

menu.

In Menu mode, select a highlighted

menu option or confirm input.

Get started

Make or answer a call.

Enter special characters.

In Idle mode, retrieve numbers

recently dialled, missed, or

received.

Press and hold [ ] to activate or

deactivate the Silent profile. Press

and hold [ ] to enter a pause

between numbers.

Delete characters from the display

or delete items in an application.

Adjust the phone volume.

In Idle mode, with the phone open,

adjust the key tone volume. With

the phone closed, press and hold to

turn on the display.

Press and hold to switch the phone

on or off.

End a call.

In Menu mode, cancel input and

return the phone to Idle mode.

Press and hold to turn on the

camera.

Enter numbers, letters, and some

special characters.

In Camera mode, switch the

camera lens

In Idle mode, press and hold [

access your voicemail server. Press

and hold [ ] to enter an

international call prefix.

1] to

Return to the previous file during

playback.

Press and hold to launch or close

the media player.

Received signal strength

Icons

Accessing services in a 2.5G

(GPRS) network; when

transferring data, this icon

animates

Skip to the next file during

playback.

Accessing services in an

EDGE network; when

transferring data, this icon

animates

Accessing services in a 3G

(UMTS) network; when

transferring data, this icon

animates

Display

Layout

Icons

display various icons.

Text and graphics

display messages,

instructions, and

information you enter.

Accessing services in a

HSDPA network; when

transferring data, this icon

animates

Soft key function

Select

Back

indicators

show the current

functions assigned

to the soft keys.

Roaming network

Voice call in progress

Get started

Out of your service area; you

cannot make or receive voice

calls

•

: MMS

: E-mail

: Voicemail

: Push

: Configuration message

Video call in progress

Out of your service area; you

cannot make or receive video

calls

Inbox full:

•

: SMS

: MMS

: E-mail

: Voicemail

: Configuration message

Memory card inserted

Bluetooth active; When

transferring data, this icon

blinks red and blue p. 116

ꢀ30

ꢀ

Connected with PC via a USB

port

Browsing Internet on PC

using the phone as modem

Connected to secured web

page

Profile setting

ꢀp. 109

•

: Normal

: Meeting

: Car

: Silent

: Outdoor

: Offline

New message:

•

: SMS

Battery power level

Access menu functions

Select an

option

1. Press a desired soft key.

Use the soft The roles of the soft keys vary

2. Press the Navigation keys

to move to the next or

previous option.

depending on the function you

are using. The bottom line of

the display indicates their

current role.

keys

3. Press <Select> or [ ] to

confirm the function

displayed or option

highlighted.

Select

Back

4. To exit, choose either of

the following methods:

• Press <Back> to move

up one level.

• Press [ ] to return to

Idle mode.

Press the left soft

key to select the

Press the right

Use shortcuts Press the number key

corresponding to the option

you want.

soft key to return

highlighted option. to the previous

menu level.

Get started

Customise your phone

2. Scroll to the sound profile

you are using.

1. In Idle mode, press

Menu> and select

Settings Phone

Language Screen text

Display

language

3. Press <Options> and

select Edit

→

4. Select Voice call ringtone

and select a ringtone for

voice calls.

2. Select a language.

3. Press <Save>.

5. Select Video call ringtone

and select a ringtone for

video calls.

You can change the call

ringtone by changing the

properties of the currently

active sound profile.

Call ringer

melody

6. Press <Options> and

select Save

To change the sound profile:

To change the profile

properties:

1. In Idle mode, press

Menu> and select

1. In Idle mode, press

Settings Profiles

→

Menu> and select

Settings Profiles

→

2. Select the profile you want.

You can set a wallpaper for the

idle screen on each display.

For the main display:

For the external display:

1. In Idle mode, press

Idle mode

Wallpaper

Menu> and select

Settings Display

Cover LCD

→

1. In Idle mode, press

Menu> and select

Settings Display

Wallpaper

→

2. Select an image type.

3. For Clock, scroll to a clock

type and press <Save>.

2. Select Images

For Cover Title, enter a

3. Scroll to an image folder

greeting and press

4. Select an image.

Save>.

For Wallpaper, press

Change> and select an

5. Press <Set>.

image. If necessary,

select the portion of the

image to be displayed

and press [ ].

4. Press <Change>.

Get started

You can set the Navigation

keys to function as shortcuts

to access your favourite

menus.

You can protect the phone

against unauthorised use with

a phone password. The phone

will require the password on

power-up.

shortcuts

Phone lock

1. In Idle mode, press

Menu> and select

Settings Phone

Shortcuts

1. In Idle mode, press

→

Menu> and select

Settings Security

Change phone password

→

2. Select a key.

2. Enter the default password,

3. Select a menu to be

assigned to the key.

00000000, and press

<Confirm>.

3. Enter a new 4- to 8-digit

password and press

You can activate the Silent

profile to avoid disturbing

other people.

Press and hold [ ] in Idle

mode.

Silent profile

Confirm>.

4. Enter the new password

again and press

<Confirm>.

5. Select Phone lock

6. Select Enable

To make a video call:

1. Enter an area code and

phone number.

7. Enter the password and

press <Confirm>.

2. Press [ ].

3. To end the call, press [ ].

Make/Answer calls

1. When the phone rings,

press [ ].

Answer a

call

To make a voice call:

Make a call

2. For a video call, press

1. Enter an area code and

phone number.

Show me> to allow the

other person to see you.

2. Press [ ].

3. To end the call, press [ ].

Press [

Adjust the

volume

during a call

Step outside the phone

Begin with your camera, the media player, the web,

and other special features

5. Press [ ] to take a photo.

The photo is saved

automatically.

6. Press <

photo.

> to take another

Use the camera

1. Open the phone.

1. In Idle mode, press

Menu> and select File

manager Images

Take a photo

View a

photo

2. In Idle mode, press and hold

→

[

] to turn on the camera.

2. Select the photo you want

from the Pictures folder.

3. Press [ ] to switch

between the interior lens

and exterior lens.

1. In Idle mode, press and hold

4. Aim the lens at the subject

and make any desired

adjustments.

Record a

video

[

] to turn on the camera.

2. Press [ ] to switch to

Record mode.

Play media files

3. Press [ ] to switch

between the interior lens

and exterior lens.

Use these methods:

Copy media

files to the

phone

•

Download from the wireless

web p. 53

4. Press [ ] to start

recording.

ꢀ

•

Download from a computer

using the optional Samsung

PC Studio

5. Press [ ] to stop recording.

The video is saved

automatically.

ꢀSamsung PC

Studio User’s Guide

6. Press <Back> to record

another video.

•

Receive via Bluetooth

ꢀ

p. 119

Copy to a memory card and

insert the card into the

1. In Idle mode, press

Play a video

phoneꢀ

p. 30

Menu> and select File

manager Videos

→

2. Select the video you want

from the Videos folder.

Step outside the phone

1. In Idle mode, press

Menu> and select Media

player

1. From the media player

screen, press [ ].

Create a

play list

Play media

files

2. Select the file you want.

2. Press [ ].

3. During playback, use the

following keys:

3. Press <Options> and

select Add

Files

→

Folder or

•

: pauses or resumes

playback.

• Up: opens the play list.

4. Scroll to the folder you

want, or press [ ] to select

the files you want.

• Left: returns to the

previous file. Moves

backward in a file when

held down.

• Right: skips to the next

file. Skips forward in a

file when held down.

5. Press <Select> or <Add>.

6. Press <Back> to return to

the media player screen.

•

: adjusts the volume.

4. Press [Down] to stop

playback.

Browse the web

Use Contacts

Using a built-in web browser, you can easily

access the wireless web to get a variety of up-

to-date services and information and to

download web content.

To the phone’s memory:

Add a

contact

1. In Idle mode, enter a phone

number.

2. Press <Options> and select

In Idle mode, press <

Launch the

web browser

Save to Contacts

→

Phone

→

New a number type.

→

3. Specify contact information:

First name, Last name,

Phone number, Work Email,

Home Email, Group,

Homepage, Birthday, and

More information (Job title,

Department, Company,

Nickname, and Notes).

•

To scroll through browser

items, press [Up] or

[Down].

Navigate

the web

•

To select an item, press

<Select> or [ ].

To return to the previous

page, press <Back>.

To access options, press

4. Press <Options> and select

Save to save the contact.

<Options>.

Step outside the phone

3. Select a contact.

To the USIM/SIM card:

Add a

contact

(continued)

4. Scroll to a number and press

1. In Idle mode, enter a phone

number.

[

] to dial, or press [ ] to

edit contact information.

2. Press <Options> and

select Save to Contacts

SIM New

→

1. In Idle mode, press

→

Create and

send a name

card

Menu> and select

3. Specify contact information:

Name, Phone number,

Group (for USIM), and

Location number.

Contacts My name card

→

2. Specify your contact

information.

3. Press <Options> and select

Save to save the name card.

4. Press [ ] to save the

contact.

4. To send the name card,

access My name card

again.

1. In Idle mode, press <Menu

and select Contacts

Search contact

Find a

contact

→

5. Press <Options> and select

Send name card

sending method.

→

2. Enter the first few letters of

the name you want.

Send messages

3. Select Text

4. Enter the message text and

press [ ].

1. In Idle mode, press

Menu> and select

Messages Create new

Text message

Send a text

message

(SMS)

→

5. Select Picture or Video or

→

Audio

2. Enter the message text and

press [ ].

6. Add an image, video clip, or

sound clip.

3. Enter destination numbers.

7. Press [ ].

4. Press [ ] to send the

message.

8. Enter destination numbers

or e-mail addresses.

9. Press [ ] to send the

message.

1. In Idle mode, press

Send a

Menu> and select

Messages Create new

Multimedia message

multimedia

message

(MMS)

→

2. Enter the message subject.

Step outside the phone

1. In Idle mode, press

Menu> and select

Messages Create new

8. Press <Options> and

Send an

e-mail

select Attach.

→

9. Press [ ].

→

10.Enter e-mail addresses.

2. Enter the e-mail subject.

3. Move to the Message field.

4. Enter the e-mail text.

11.Press [ ] to send the

e-mail.

5. Move to the Attach files

1. In Idle mode, press

Send files

by MMS

line.

Menu> and select

Messages Create new

File messenger

→

6. Press <Options> and select

→

Add files

Add name card,

or Add v-calendar

2. Enter the message subject.

3. Move to the Message field.

4. Enter the message text.

7. Select images, videos,

sounds, name cards, or

calendar data.

5. Move to the Attach files

line.

View messages

6. Press <Options> and

select Add files Add

name card, or Add

v-calendar

When a notification appears:

View a text

message

1. Press <View>.

2. Select the message from

the Inbox.

From the Inbox:

7. Select images, videos,

sounds, name cards, or

calendar data.

8. Press <Options> and

1. In Idle mode, press

select Attach

Menu> and select

Messages Inbox

→

9. Press [ ].

2. Select an SMS message

10.Enter destination numbers

or e-mail addresses.

(

11.Press [ ] to send the

message.

Step outside the phone

When a notification appears:

1. In Idle mode, press

Menu> and select

Messages Email inbox

View a

multimedia

message

View an

e-mail

1. Press <View>.

→

2. Press <Options> and select

2. Press <Options> and

select Download to

download new e-mails or

headers.

Retrieve

3. Select the message from the

Inbox.

From the Inbox:

3. Select an e-mail or header.

1. In Idle mode, press

4. If you selected a header,

press <Options> and

select Retrieve to view the

body of the e-mail.

Menu> and select

Messages Inbox

→

2. Select an MMS message

(

Use Bluetooth

1. In Idle mode, press

Menu> and select

Settings Connectivity

Bluetooth My devices

Your phone is equipped with Bluetooth

technology, enabling you to connect the phone

wirelessly to other Bluetooth devices and

exchange data with them, talk

Search for

and pair with

a Bluetooth

device

→

Search new device

hands-free, or control the phone remotely.

2. Select a device.

1. In Idle mode, press

3. Enter a Bluetooth PIN or the

other device’s Bluetooth

Turn on

Bluetooth

Menu> and select

Settings Connectivity

Bluetooth Activation

→

PIN, if it has one, and press

→

<OK>.

4. When the owner of the

other device enters the

same code, pairing is

complete.

2. Select My phone’s

visibility On to allow

→

other devices to find your

phone.

Step outside the phone

1. When a device attempts to

access your phone, press

1. Access an application,

Contacts File manager

Calendar Schedule, or

Task

Receive

data

Send data

<Yes> to permit the

connection.

2. If necessary, press <Yes

to confirm that you are

willing to receive.

2. Select the item you want to

send.

3. Press <Options> and

select Send name card

Send Send schedule

Send task Via

bluetooth

Switch applications

You can switch to other applications from a

menu, without closing the menu screen you

were using.

→

4. Select a device.

5. If necessary, enter the

Bluetooth PIN and press

1. While using a menu, press

Switch to an

application

OK>.

[

2. Select an application.

Use a memory card

You can use a memory card to increase your

phone’s memory capacity.

•

Call: opens the dialling

Available

applications

screen.

Messages: accesses the

Messages menu.

BigPond: launches the web

browser.

•

Frequent erasing and

writing will shorten a card’s

lifespan.

Do not remove a card from

the phone or turn off the

phone while data is being

accessed or transferred.

This could result in loss of

data and/or damage to the

card or phone.

Important

memory

card

information

1. Press [ ].

Close all

running

applications

2. Scroll to End all?

3. Press <Yes>.

•

Do not subject cards to

strong shocks.

Do not touch card terminals

with your fingers or metal

objects. If dirty, wipe the

card with a soft cloth.

Step outside the phone

•

Keep cards away from small

children or pets.

Do not expose cards in a

place subject to

electro-static discharge

and/or electrical noise.

1. Press the card so that it is

disengaged from the phone.

Important

memory

card

information

Remove the

memory

card

•

2. Remove the card from the

slot.

(continued)

Using a card adapter and a

USB card reader/writer, you

can read the card on a PC.

Use a card

adapter

1. Insert the card into the card

slot, with the label side face

up.

Insert a

memory

card

1. Insert a memory card into a

card adapter, and then the

adapter into a card reader/

writer.

2. Plug the USB connecter of

the card reader/writer into

the USB port on your PC.

3. Access the appropriate

memory disk and copy to

and from the card.

2. Press the card until it locks

into place.

Using T9 mode

T9 is a predictive text input mode that allows

you to enter any character using single

keystrokes.

Enter text

ABC, T9, Number, and Symbol modes

You can enter text for some features such as

Messages, Contacts, or Organiser, using ABC

mode, T9 mode, Number mode, and Symbol

mode.

Entering a word in T9 mode

1. Press [

Press each key once for each letter.

For example, press [ ], [ ], [ ], [

] to enter Hello in T9 mode.

2] to [9] to start entering a word.

5], and

Changing the text input mode

•

Press and hold [ ] to switch between T9

) and ABC ( ) modes.

Press [ ] to change case or to switch to

Number mode ( ).

Press and hold [ ] to switch to Symbol

mode ( ).

T9 predicts the word that you are typing,

and it may change with each key that you

press.

2. Enter the whole word before editing or

deleting characters.

(

3. When the word displays correctly, go to step

4. Otherwise, press [0] to display alternative

word choices for the keys that you have

pressed.

For example, Of and Me use [6] and [3].

Enter text

4. Press [ ] to insert a space and enter the

next word.

3. Press <Spell>.

4. Enter the word you want using ABC mode

and press <Add>.

Other T9 mode operations

•

Press [1] to enter periods or apostrophes

automatically.

Using ABC mode

Press the appropriate key until the character

you want appears on the screen.

•

Press [ ] to insert a space.

Press the Navigation keys to move the

cursor.

Characters in order displayed

Key

Upper case

Lower case

•

Press [

Press and hold [

] to delete characters one by one.

] to clear the entire display.

Adding a new word to the T9 dictionary

This feature may not be available for some

languages.

1. Enter the word that you want to add.

2. Press [0] to display alternative words for

your key presses. When there are no more

alternative words, Spell displays on the

bottom line.

(Creating an SMS message with GSM alphabet encoding)

Other ABC mode operations

Using Symbol mode

Symbol mode enables you to insert symbols.

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the

cursor to move to the right automatically or

press [Right]. Then, enter the next letter.

Press

display more symbols

select a symbol

[Up] or [Down].

•

Press [ ] to insert a space.

Press the Navigation keys to move the

cursor.

the corresponding

number key.

•

Press [

Press and hold [

] to delete characters one by one.

] to clear the entire display.

clear the entered

symbols

[C].

insert the symbols

<OK>.

Using Number mode

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you

want.

Redialling recent numbers

Call functions

Advanced calling features

1. In Idle mode, press [ ] to display the list of

recent numbers.

2. Scroll to the number you want and press

Making a call

[

1. In Idle mode, enter the area code and phone

number.

Making a call from Contacts

Once you have stored a number in Contacts,

you can dial the number by selecting it from

• Press [

] to clear the last digit or press and

hold [

] to clear the whole display.

Contacts.ꢀp. 43

• Press and hold [ ] to enter a pause

between numbers.

You can also use the speed dial feature to

assign your most frequently dialled numbers to

2. Press [ ].

specific number keys.ꢀp. 47

3. When you want to end the call, press [ ].

You can quickly dial a number from the USIM/

SIM card using its location number assigned

when stored.

Making an international call

1. In Idle mode, press and hold [

]. The

1. In Idle mode, enter a location number and

press [ ].

character appears.

2. Enter the country code, area code, and

phone number, then press [ ].

2. Scroll through other numbers, if necessary.

3. Press <Call> or [ ] to make a voice call,

or <V-Call> to make a video call.

Viewing missed calls

If you have missed calls, the screen displays

how many calls you have missed.

Answering a call

When you receive an incoming call, the phone

rings and displays the incoming call image.

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Press <Accept> or [ ] to answer the call.

Tips for answering a call

Using the headset

•

When Anykey answer is active, you can

Use the headset to make or answer calls

without holding the phone.

Connect the headset to the jack on the left side

of the phone. The button on the headset works

as follows:

press any key, except for <Reject> and

[

].ꢀ

p. 111

When Active folder is active, you can

simply open the phone. p. 110

Press <Reject> or [ ] to reject a call.

Press and hold [ ] to reject a call or mute

the ringer, depending on the Volume key

setting. p. 111

•

ꢀ

•

Press

redial the last call

answer a call

end a call

the button twice.

the button.

ꢀ

and hold the button.

Call functions

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Options during a call

You can access a number of functions during a

call.

4. Press <Options> and select Drop

held call to end the call on hold.

→

Drop

Adjusting the volume during a call

5. To end the current call, press [ ].

Use [

a call.

] to adjust the earpiece volume during

Answering a second call

You can answer an incoming call while already

on the phone, if your network supports this

function and you have activated the call waiting

Press [ ] to increase the volume level and

press [ ] to decrease the volume level.

feature.ꢀp. 115

Placing a call on hold/Retrieving

1. Press [ ] to answer the call. The first call is

automatically put on hold.

Press <Hold> to place a call on hold, or press

<Unhold> to retrieve the call.

2. Press <Swap> to switch between the calls.

Making a second call

You can make another call if your network

supports this function.

3. Press <Options> and select Drop

held call to end the call on hold.

→

Drop

4. To end the current call, press [ ].

1. Press <Hold> to put the call on hold.

•

Join: set up a multi-party call by adding a

caller on hold to a currently active call. You

can include up to 5 people on a multi-party

call.

Split: have a private conversation with one

multi-party call participant. The other

participants can converse with each other.

After the private conversation, select Join to

return both private participants to the multi-

party call.

Drop: disconnect the call currently on hold

or active call.

Drop call: disconnect one multi-party call

participant.

Transfer: transfer the currently active call

to a caller on hold. The two callers can talk

to each other, but you are disconnected from

the call.

Unmute/Mute: switch off the phone's

microphone so that the other person on the

phone cannot hear you, or switch it back on.

Using the speakerphone feature

Use the phone as a speakerphone to talk and

listen with the phone a short distance away.

Press [ ] and then <Yes> to activate the

speakerphone feature. Press [ ] again to

switch back to the earpiece.

Using In-call options

During a call, press <Options> to access the

following options:

•

Loudspeaker/Loudspeaker off: turn on

the speakerphone feature or switch back to

Normal mode.

Switch to headset/Switch to phone:

switch the call to a Bluetooth headset or

hands-free car kit, or back to the phone. To

use this feature, you first need to connect

your headset or car kit to the phone.

•

ꢀ

p. 117

Call functions

•

Mute key tone

the key tones off or on.

Unmute key tone: turn

•

PocketNews: access PocketNews if

supported by your USIM/SIM card.

End call/End calls: disconnect the call

currently on hold, active call, or all calls.

Save to Contacts: save the entered

number to Contacts.

Save to memo: save the entered number

as a memo.

To communicate with answering machines

or computerised telephone systems,

Unmute key tone must be selected.

•

New call: make a new voice call.

Contacts: locate or store contacts in

Contacts.

•

Send text message: create and send a

Using the video call feature

new SMS message.

In a 3G (UMTS) service area, your phone can

make or receive a video call, allowing you to

see another person on the screen during a

conversation. The other person’s phone must

support the video call feature.

Send DTMF: send DTMF (Dual tone multi-

frequency) tones as a group. The DTMF

tones are the tones used in phones for tone

dialling, sounding when you press the

number keys. This option is helpful for

entering a password or an account number

when you call an automated system, like a

banking service.

Making a video call

1. In Idle mode, enter the area code and phone

number.

•

Memo: create a memo.

2. Press [ ].

•

Mute voice/Unmute voice: turn off or on

the microphone.

Mute camera & voice/Unmute all: turn

off or on the camera and the microphone.

Mute key tone/Unmute key tone: turn off

or on the key tones.

Zoom: display the zoom control bar and

zoom in or out by pressing [Up] or [Down] or

hide the control bar.

Switch camera: switch between the interior

camera lens and exterior camera lens.

Brightness/Hide brightness: display the

brightness control bar and adjust the

brightness by pressing [Left] or [Right].

Effects: change the colour tone of the

image.

Show information/Hide information:

display or hide information about the video

call.

Answering a video call

When you receive a video call, answer a video

call as receiving a voice call. Press <Show

me> to allow the caller to see you.

Using video call options

During a video call, press <Options> to access

the following options:

•

Loudspeaker off

on the speakerphone feature.

Switch to headset Switch to phone

/Loudspeaker: turn off or

•

switch the call to a Bluetooth headset or

hands-free car kit, or back to the phone. To

use this feature, you first need to connect

your headset or car kit to the phone.

•

ꢀ

p. 117

Mute camera

on the camera.

•

/Unmute camera: turn off or

•

Send DTMF: send Dual tone multi-

Menu functions

frequency (DTMF) tones as a group after

entering the entire number you need to send

or retrieving a number from Contacts.

Video quality: change the image quality of

the camera.

All menu options listed

Call log (Menu 1)

Use this menu to view the calls you have

dialled, received, or missed, the length of the

calls. You can also check the cost of your calls,

if your USIM/SIM card supports this function.

•

End call: disconnect the video call.

Save to Contacts: save the entered

number to Contacts.

Send text message: create and send a

new SMS message.

Save to memo: save the entered number

as a memo.

•

To access this menu, press <Menu> in Idle

mode and select Call log

Missed calls (Menu 1.1)

This menu displays the most recent calls you

did not answer.

Accessing a call log

1. Press [Left] or [Right] to move to another

call type.

2. Press [Up] or [Down] to scroll through the

call list.

3. Press [ ] to view the details of a call, or

Dialled calls (Menu 1.2)

This menu displays the most recent calls you

have dialled.

[

] to dial a number.

Received calls (Menu 1.3)

Using call log options

This menu displays the most recent calls you

have received.

While viewing call details, press <Options> to

access the following options:

•

Voice call: make a voice call to the number.

Video call: make a video call to the number,

if the 3G service is available.

Use number: paste the selected number to

the normal dialling screen.

Save to Contacts: save the number to

Contacts.

Send message: send a message to the

selected number via SMS, MMS, or file

messenger.

Delete: delete the selected call log.

Delete all: delete all call logs.

Current contacts (Menu 1.4)

This menu displays all of the calls you have

dialled, received, or missed.

•

Delete all (Menu 1.5)

Use this menu to delete all logs in each call

type.

1. Press [ ] to select the call types to be

cleared.

2. Press <Delete>.

•

3. Press <Yes> to confirm the deletion.

Menu functions

4. Enter the phone password and press

Calls cost (Menu 1.7)

<Confirm>.

This network feature displays the cost of calls.

This menu is available only if supported by your

USIM/SIM card. Note that this is not intended

to be used for billing purposes.

If the phone is locked, it will require the

phone password. The password is preset to

00000000. You can change this password.

ꢀ

p. 124

•

Total costs: check the total cost of all your

calls. If the total cost exceeds the maximum

cost set in Edit cost limit, you must reset

the counter before you make another call.

Data calls (Menu 1.6)

Use this menu to view the total amount of sent

or received data.

•

Last call cost: check the cost of your last

call.

Max cost: check the maximum cost set.

•

Total sent: check the total amount of data

you have sent.

Press <Options> to access the following

options:

•

Total received: check the total amount of

data you have received.

•

Reset call cost: reset the cost counters.

Edit cost limit: set the maximum cost

authorised for your calls.

Setup currency: set the currency that is

applied when the cost of your call is

calculated.

To reset a counter or all counters, press

Options> and select Reset or Reset all

If the phone is locked, it will require the phone

password. The password is preset to 00000000

•

You can change this password.ꢀp. 124

Calls time (Menu 1.8)

Contacts (Menu 2)

This menu displays the time log for voice and

video calls made and received. The actual time

invoiced by your service provider will vary.

You can store phone numbers on your USIM/

SIM card and in your phone’s memory. The

USIM/SIM card and phone’s memory are

physically separate, but they are used as a

single entity called Contacts.

•

Total dialled: check the total length of

voice calls dialled.

To access this menu, press <Menu> in Idle

Total received: check the total length of

voice calls received.

Total dialled: check the total length of

video calls dialled.

Total received: check the total length of

video calls received.

mode and select Contacts

Search contact (Menu 2.1)

Use this menu to search for contact information

in Contacts.

To reset a counter or all counters, press

Options> and select Reset or Reset all

Finding a contact

1. Enter the first few letters of the name that

you want to find.

If the phone is locked, it will require the phone

password. The password is preset to 00000000

You can change this password.ꢀp. 124

2. Select the name you want from the list.

3. Scroll to a number and press [ ] to dial, or

press [ ] to edit contact information.

Menu functions

•

Video call: make a video call to the number,

if the 3G service is available.

Copy to SIM/Copy to phone: copy the

contact from the phone’s memory to the

USIM/SIM card, or vice versa.

Send name card: send the contact via

SMS, MMS, e-mail, file messenger, or

Bluetooth.

Print via Bluetooth: print contact

information by connecting the phone to a

printer via Bluetooth.

Using contact options

While viewing contact details, press

<Options> to access the following options:

•

Edit: edit contact information.

•

Send message: send a message via SMS,

MMS, file messenger, or e-mail.

•

Special options: set the following options:

Picture: assign a caller ID image to alert

you to a call from the person.

Ringtone: assign a ringtone to alert you to

a call from the person.

Msg. alert tone: select a ringtone to alert

you to an incoming message from the

person.

Some printers may not be compatible with

your phone.

•

Use number: paste the selected number to

the normal dialling screen.

Delete: delete the contact.

Add to speed dial: set the selected number

as a speed dial entry.

•

More information: enter the job title,

department, company, nickname, and

additional note of the person.

New contact (Menu 2.2)

Use this menu to add a new contact to

Contacts.

3. Press <Options> and access the following

options to add additional information:

•

Storing a contact to the phone’s

memory

Special options: assign a caller ID

image, call ringer, or message ringer for

the contact.

Add phone number: add a phone

number in any type to the contact.

Delete phone number: remove the

selected number type from the contact.

Change type: change the number type

from the contact.

1. Select Phone

2. Change the settings or enter information

about the contact:

•

First name/Last name: assign a name.

Phone number: add a phone number.

Work Email: assign a business e-mail

address.

•

Home Email: assign a personal e-mail

address.

Mark video call/Unmark video call: set

the selected number as a video call

number, or cancel the setting.

•

Group: assign a caller group.

Homepage: enter a homepage address.

Birthday: enter the person’s birthday.

4. Press <Options> and select Save to save

the contact.

Menu functions

Storing a contact to the USIM/SIM card

Groups (Menu 2.3)

1. Select SIM

2. Enter information about the contact:

Use this menu to create and manage caller

groups.

•

Name: assign a name.

Phone number: add a phone number.

Group: (For USIM) assign a caller group.

Location number: enter a location

number.

Creating a new caller group

1. Press <Options> and select Add group

2. Enter a group name and press <Save>.

Managing caller groups

3. If you are using a USIM card, press

•

From the group list, press <Options> to access

the following options:

Options> to add additional information:

Add item: add a information type to the

contact.

Delete item: remove the selected type

from the contact.

•

View members: display the members of

the selected group.

•

Add group: add a new group.

Rename group: change the group name.

Delete group: delete the selected group.

Group members, however, will not be

deleted from Contacts.

4. Press [ ] to save the contact.

•

Delete all groups: delete all groups.

•

Change: assign a different number to a key.

Remove: clear the speed dial setting for a

key.

Speed dial (Menu 2.4)

Use this menu to assign speed dial numbers (2

to 9) to 8 of your most frequently dialled

numbers.

Dialling speed dial numbers

Assigning speed dial numbers

In Idle mode, press and hold the appropriate

key.

1. Select a key location from

. Key

reserved for your voicemail server.

2. Select a contact from the contact list.

3. Select a number.

My name card (Menu 2.5)

Use this menu to create your name card and

send it to other people.

Managing speed dial entries

From the Speed dial screen, press <Options

to access the following options:

Saving your name card

The procedure for creating your name card is

the same as the one for saving a phone number

•

Add: assign a number to an unassigned key.

Details: check the name and number

in the phone’s memory.ꢀp. 45

assigned to a key.

•

Video call: make a video call to the number

assigned to a key.

Menu functions

Using name card options

Own number (Menu 2.7)

After saving your name card, press <Options

Use this feature to check your phone numbers,

or to assign a name to each of the numbers.

Changes made here do not affect the actual

subscriber numbers on your USIM/SIM card.

to access the following options:

•

Edit: edit the name card.

Send name card: send the name card via

SMS, MMS, e-mail, file messenger, or

Bluetooth.

Service number (Menu 2.8)

•

Print via Bluetooth: print the name card

by connecting the phone to a printer via

Bluetooth.

Use this menu to view the list of Service Dialling

Numbers (SDN) assigned by your service

provider, including emergency numbers and

numbers for directory enquiries. This menu is

available if your USIM/SIM card supports SDN.

Some printers may not be compatible with

your phone.

Scroll to the number you want and press [ ].

•

Delete: delete the name card.

Settings (Menu 2.9)

Copy all (Menu 2.6)

Use this menu to change the default settings for

Contacts entries.

Use this menu to copy all of the contacts stored

on the USIM/SIM card to the phone’s memory,

or vice versa.

•

Viewing settings: change the sort order of

the contact list.

•

Default storage settings: select a default

memory location for saving contacts. If you

select Optionally, the phone will ask you to

select a memory location each time you save

a number.

Downloading or receiving music or

video files

You can play the following types of files on your

phone:

•

Music: MP3, AAC, WAV, 3GA, M4A

Video: MP4, 3GP, RM, RAM, RV

Memory status (Menu 2.0)

Use the following methods to save music or

video files to your phone’s memory:

Use this menu to check the number of contacts

you have stored in the phone’s memory and on

the USIM/SIM card.

•

Download from the wireless web

Download from a computer using Samsung

ꢀp. 53

PC Studio

Guide

ꢀSamsung PC Studio User’s

Media player (Menu 3)

You can play music and video files. To enjoy

high quality sound, you can use an optional

Bluetooth stereo headset.

•

Receive via an active Bluetooth connection

p. 119

Copy to a memory card and insert the card

into the phone p. 29

Downloaded or received files are stored in the

Downloads folder in Music or Videos

ꢀ

•

ꢀ

Normal headsets and Bluetooth mono headsets

are not compatible with the media player.

To access this menu, press <Menu> and select

Media player

Menu functions

During playback, use the following keys:

Creating a play list

Add the media files to the play list so you can

play them.

Key

Function

Pauses or resumes playback.

1. From the media player screen, press [ ].

Left

Returns to the previous file. Moves

backward in a file when held down.

2. Press <Options> and select Add

3. Select Folder or Files

Right

Skips to the next file. Moves

forward in a file when held down.

4. Scroll to the folder you want or press [ ] to

select the files you want.

5. Press <Select> or <Add>.

6. Press <Back> to return to the media player

screen.

Opens the play list.

Adjusts the volume.

Stops playback.

Down

Playing media files

Using media player options

1. From the media player screen, press [ ].

2. Select a file. The file plays.

From the media player screen, press

•

Options> to access the following options:

Play via: play the selected file via the phone

speaker or a Bluetooth stereo headset.

•

Transfer to Bluetooth stereo headset

•

Show controller/Hide controller: display

or hide the control bar of the Media player.

Details: access the file properties.

Player settings: change the default

settings for playing media files:

Play options: select a repeat mode.

Volume: select a volume level.

Controller: display or hide the controller

image.

Audio player skin: select a skin image.

Transfer to phone: switch sound output to

a Bluetooth stereo headset or back to the

phone speaker.

Pause/Resume: pause or resume playback.

Stop: stop playback.

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth.

Open play list: access the play list.

Activate key: get a new licence key when

•

the key for the selected DRM file expires.

•

VOD settings: select a connection profile to

be used for accessing a video streaming

server. You can also create or edit a profile.

•

Reactivate key: get another licence key

even when the key for the selected DRM file

has not expired.

Go to File Manager: access all music and

video files.

ꢀ

p. 120

Key management: manage the licence

keys you have acquired.

•

Hidden from Bluetooth/Visible to

Bluetooth: hide the file so that other

Bluetooth devices cannot access it, or share

the file with other Bluetooth devices.

Menu functions

Using play list options

Playing media files with the phone

closed

From the media player screen, press [Up].

Press <Options> to access the following

options:

Press and hold [

] to launch the media player

and start playback. Use the following keys to

control the media player:

•

Play via: play the selected file via the phone

speaker or a Bluetooth stereo headset.

Key

Functions

•

Play: play the selected file.

Add: add files to the play list.

Remove: remove the selected file or all files

from the current play list.

Pauses or resumes playback. Closes

the media player when held down.

Returns to the previous file. Moves

backward in a file when held down.

•

Move: move the selected file to the position

you want within the current play list or

another play list.

Skips to the next file. Skips forward

in a file when held down.

•

Copy: make a copy of the selected file in the

current play list or another play list.

Adjusts the volume.

New list: add a new play list.

Locks the exposed keys when held

down to keep accidental presses

from affecting playback.

Internet (Menu 4)

Press

The web browser on your phone allows you to

access the wireless web. Using the web

browser, you can access up-to-date information

and a wide variety of media contents, such as

wallpapers, ringtones, and music files.

select a browser item

Select> or [ ].

Back>.

return to the previous

page

Using browser options

From any web page, press <Options> to

access the following browser options:

To access this menu, press <Menu> in Idle

mode and select Internet

•

Go: move backward or forward through

BigPond Home (Menu 4.1)

pages in history.

Use this menu to connect your phone to the

network and load the homepage of the wireless

web service provider. You can also press

Reload: reload the current page with

updated information.

Desktop view/Smart-fit view: change the

display mode of the browser.

Page size: change the page size.

BigPond Home: return to the homepage.

Add to Bookmarks: bookmark the current

> in Idle mode.

Navigating the web browser

•

Press

scroll through browser

items

[Up] or [Down].

page.

Menu functions

•

View bookmarks: access the bookmark

list.

Enter URL: enter a URL address manually.

Copy URL: send the URL of the current page

via SMS, MMS, or e-mail.

Save: save the image of the current web

page or the current page.

Saved Pages: access the list of web pages

you have saved.

History: access the list of web pages you

have accessed.

Advanced: change the various settings for

the browser.

Clear cache: clear the cache. The cache is a

temporary memory site that stores recently

accessed web pages.

Empty cookies: delete cookies. Cookies are

pieces of personal information sent to a web

server while navigating the web.

Cookie options: set whether or not cookies

are stored. If you select Prompt, the phone

will ask you to save the cookies of the

current page.

Preferences: change the settings for the

web browser to suit your preference.

Certificates: access certificate information.

Page details: access the page properties.

Browser settings: select a connection

profile to be used for connecting to the

Internet. You can also create or edit a

•

profile.ꢀp. 120

About browser: access version and

Exiting the web browser

Press [ ] to end the network connection and

exit the browser.

Using bookmark options

Enter URL (Menu 4.2)

From the bookmark list, press <Options> to

Use this menu to manually enter a URL address

and access the associated web page.

access the following options:

•

Go to: access the bookmarked web page.

Enter URL: enter a URL address manually.

Edit bookmark: edit the URL address and

title of the bookmark, if you selected an

added one.

You can add the entered URL to the Bookmark

list by selecting Add bookmark

Bookmarks (Menu 4.3)

Use this menu to save URL addresses in order

to quickly access web pages, or access the

preset bookmarks.

•

Add bookmark: add a new bookmark.

Copy URL: send the URL address of the

bookmark via SMS, MMS, or e-mail.

Adding a new bookmark

•

Delete: delete the selected bookmark or all

bookmakrs.

1. Press <Options> and select Add

bookmark

Saved pages (Menu 4.4)

2. Enter a title and press [Down].

You can access the list of pages you have

saved. Select a URL from the list to access the

corresponding web page.

3. Enter a URL address and press <Save>.

Menu functions

From the saved page list, press <Options> to

access the following options:

Advanced (Menu 4.6)

Use this menu to clear the cache, delete cookies

or change the browser display settings.

•

View: access the selected web page.

Rename: change the name of the selected

web page.

•

Clear cache: clear the cache. The cache is a

temporary memory site that stores recently

accessed web pages.

Empty cookie: delete cookies. Cookies are

pieces of personal information sent to a web

server while navigating the web.

Cookie options: set whether or not cookies

are stored. If you select Prompt, the phone

will ask you to save the cookies of the

current page.

•

Delete: delete the selected web page of all

pages.

History (Menu 4.5)

You can access the list of pages you have

accessed. Select a URL from the list to access

the corresponding web page.

From the history list, press <Options> to

access the following options:

•

Preferences: change the browser display

and sound settings.

•

Go to: access the selected web page.

Delete: delete the selected web page or all

pages.

About browser: access version and

•

Details: access the page properties of the

selected web page.

Browser settings (Menu 4.7)

FOXTEL (Menu 5.2)

Use this menu to select a connection profile to

be used for connecting to the Internet. You can

Use this menu to access the online TV service

supported by your service provider. You can

watch TV and use various Mobile TV services.

Using this link, you can access to watch 12

exclusive FOXTEL channels on your phone

wherever you are. For further details, please

refer to your Next G User Guide.

also create or edit a profile.ꢀp. 120

My Place (Menu 5)

The My Place menu enables you to use various

Internet services supported by your service

provider.

Search (Menu 5.3)

To access this menu, press <Menu> in Idle

Use this menu to access the Internet on your

phone and launch the Telstra search engine. For

further details, please refer to your Next G User

Guide.

mode and select My Place

BigPond (Menu 5.1)

Use this menu to access a range of mobile

entertainment from the BigPond homepage,

only available on Telstra’s Next G network. For

further details, please refer to your Next G User

Guide.

Menu functions

Download and watch music videos, movie

trailers, ringtones and much more with

Download Manager. For further details, please

refer to your Next G User Guide.

Email (Menu 5.4)

Use this menu to access the E-mail service

supported by your service provider. With your

Telstra’s Next G mobile, you can check your

BigPond, Hotmail, Yahoo! Mail and other

Internet provider e-mail accounts, wherever

you are, whenever it suits you. For further

details, please refer to your Next G User Guide.

Photos (Menu 5.7)

Use this menu to access the website preset by

your service provider and download pictures.

You can shoot, store, view, and share photos

with your family and friends, wherever you are,

from your mobile or PC. For further details,

please refer to your Next G User Guide.

Music (Menu 5.5)

Use this menu to access the BigPond Music

Player and download music files. For further

details, please refer to your Next G User Guide.

Maps (Menu 5.8)

Use this menu to access a location service

based on GPS positioning technology. With

access to Whereis Mobile on your phone, you

can quickly find your way to any location

around Australia. For further details, please

refer to your Next G User Guide.

Downloads (Menu 5.6)

Use this menu to access the website preset by

your service provider and have entertainment

at your fingertips to download.

Text message (Menu 6.1.1)

My Account (Menu 5.9)

Short Message Service (SMS) allows you to

send or receive text messages.

Use this menu to manage your Telstra

Accounts. View and pay your Telstra bills,

manage your content subscriptions and more.

For further details, please refer to your Next G

User Guide.

Creating and sending an SMS message

1. Enter your message and press [ ].

• The maximum number of characters

allowed in a message varies by service

provider. If your message exceeds the

maximum number of characters, the

phone will split the message.

Messages (Menu 6)

Use the Messages menu to send and receive

text messages, multimedia messages, and

e-mails. You can also access push messages,

voicemails, broadcast messages, and

configuration messages.

To access this menu, press <Menu> in Idle

mode and select Messages

• You can use various options by pressing

<Options>.ꢀnext section

2. Enter a destination number.

To send the message to more than one

recipient, fill in additional destination fields.

3. Press [ ] to send the message.

Create new (Menu 6.1)

Use this menu to create and send text

messages, multimedia messages, or e-mails.

Menu functions

Using options while composing an SMS

message

While composing a message, press <Options

Creating and sending an MMS message

1. Enter the message subject.

You can use various options by pressing

to access the following options:

<Options> in each field.

ꢀnext section

•

Send: send the message.

Input method: change the text input

mode.

2. Select the Text line.

3. Enter the message text and press [ ].

•

Input language: change the language to

4. Select the Picture or Video or Audio line

be used in T9 input mode.

and add an image, video, or sound clip.

Insert: insert a text template, Contacts

entry, or bookmarked URL address.

Save to Drafts: save the message in the

Drafts folder.

• The maximum size allowed for a message

can differ, depending on your service

provider.

• Depending on the file type or DRM (Digital

Rights Management) system, some files

may not be able to be forwarded.

Multimedia message (Menu 6.1.2)

Multimedia Message Service (MMS) delivers

messages containing a combination of text,

5. When you have finished, press [ ].

image, video, and audio, from phone to phone

or from phone to e-mail.

6. Enter a phone number or e-mail address.

To send the message to more than one

recipient, fill in additional destination fields.

•

Add name card: attach a Phonebook entry

as a name card.

Add v-calendar: attach calendar data as a

data format attachment.

Save to Drafts: save the message in the

Drafts folder.

Add page: add pages. Move to each page

by pressing [Left] or [Right].

Move page: move the current page

backward or forward to change the page

order.

Delete page: delete a page.

Edit style: change the page properties.

This page: set the page duration and

change font colour and style for the selected

page.

All page: change the background colour and

page layout.

7. Press [ ] to send the message.

Using options while composing an MMS

message

While composing a message, press <Options

to access the following options:

•

Input: enter the message text.

Add: add an image, video, or sound clip.

Send: send the message.

Preview: view the message as it will be

shown on the recipient’s phone.

•

Input method: change the text input

mode.

Input language: change the language to

be used in T9 input mode.

Insert text template: insert a text

template.

•

Edit text

/Change file: edit the added text,

image, video, or sound clip.

Menu functions

•

Delete text

text, image, video, or sound clip.

Delete file: delete the added

6. Select images, videos, sounds, name cards,

calendar data, or tasks.

•

Save as template: save the message as a

template in the Multimedia templates

folder.

7. Press <Options> and select Attach

8. When you have finished, press [ ].

9. Enter a phone number or e-mail address.

To send the message to more than one

File messenger (Menu 6.1.3)

recipient, fill in additional destination fields.

Use this menu to send multiple media files by

attaching them to an MMS message.

10.Press [ ] to send the message.

Using options while composing an MMS

message with files

Creating and sending an MMS message

with files

While composing a message, press <Options

to access the following options:

1. Enter the message subject.

You can use various options by pressing

•

Send: send the message.

Input method: change the text input

mode.

<Options> in each field.ꢀnext section

2. Move to the Message field.

3. Enter the message text.

4. Move to the Attach files line.

5. Press <Options> and select Add files

name card, or Add v-calendar

•

Input language: change the language to

be used in T9 input mode.

Insert text template: insert a text

template.

Add

•

Insert: insert a text template, Contacts

entry, or bookmarked URL address.

Attached file list: access the list of the files

you attached.

Add files: attach images, videos, or sounds.

Add name card: attach a Contacts entry as

a name card.

Creating and sending an e-mail

1. Enter the e-mail subject.

You can use various options by pressing

<Options> in each field.ꢀnext section

•

2. Move to the Message field.

3. Enter the message text.

•

Add v-calendar: attach calendar data as a

4. Move to the Attach files line.

5. Press <Options> and select Add files

name card, or Add v-calendar

6. Select images, videos, sounds, name cards,

or calendar data.

7. Press <Options> and select Attach

data format attachment.

Add

Delete all attachments: delete all

attachments.

Save to Drafts: save the message in the

Drafts folder.

Email (Menu 6.1.4)

8. When you have finished, press [ ].

9. Enter an e-mail address.

To send the e-mail to more than one

recipient, fill in additional destination fields.

10.Press [ ] to send the e-mail.

You can send and receive e-mails that include

text, audio, and images. To use this feature,

you need to subscribe to an e-mail service and

set up your e-mail account.ꢀp. 77

Menu functions

Using options while composing an e-mail

•

Add v-calendar: attach calendar data as a

data format attachment.

Delete all attachments: delete all

attachments.

Save to Drafts: save the e-mail in the

Drafts folder.

While composing an e-mail, press <Options

to access the following options in each field:

•

Send: send the message.

Input method: change the text input

mode.

•

Input language: change the language to

be used in T9 input mode.

Insert text template: insert a text

template.

Insert: insert a text template, Contacts

entry, or bookmarked URL address.

Attached file list: access the file list you

attached.

Inbox (Menu 6.2)

This folder stores all types of messages you

have received, except for e-mails.

Viewing a message

The following icons may appear on the list to

show the message type:

•

SMS message

MMS message

MMS notification

Push message from web servers

•

Add files: add images, videos, or sounds.

Add name card: attach a Contacts entry as

a name card.

•

Configuration message, containing

network parameters from your service

provider

•

Create email: send an e-mail to the

highlighted e-mail address.

Create multimedia message: send an

MMS message to the highlighted phone

number or e-mail address.

Reply: reply to the sender via SMS or MMS.

Forward: forward the message to other

people.

Call back: dial the phone number of the

sender.

Save to Contacts: save the sender’s phone

number to Contacts. If a phone number,

e-mail address, or URL address within the

message is selected, you can also save it to

Contacts.

Move to SIM/Move to Phone: move the

message between the phone’s memory and

the USIM/SIM card.

• Depending on the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

•

• A

icon next to a message means that the

message is of high priority. A grey-coloured

message icon indicates low priority.

•

Using message options

While viewing a message, press <Options> to

access the following options:

SMS messages

•

Call/Go to URL/Go to RTSP: dial the

highlighted phone number or access the

highlighted web link.

Add to bookmark: save the highlighted

web link to the bookmark list.

•

Menu functions

•

Print via Bluetooth: print the message by

connecting the phone to a printer via

Bluetooth.

•

Reply: reply to the sender via SMS, MMS, or

file messenger.

Reply to all: send a reply to the sender and

all recipients.

Forward: forward the message to other

people.

Call back: dial the phone number of the

sender.

Save as template: save the message as a

template in the Multimedia templates

folder.

Save files: save media items from the

message into your phone’s memory or a

memory card.

Save to Contacts: save the sender’s phone

number to Contacts. If a phone number,

e-mail address, or URL address within the

message is selected, you can also save it to

Contacts.

Some printers may not be compatible with

your phone.

•

Delete: delete the message.

MMS messages

•

Call/Go to URL/Go to RTSP: dial the

highlighted phone number or access the

highlighted web link.

Add to bookmark: save the highlighted

web link to the bookmark list.

Create email: send an e-mail to the

highlighted e-mail address.

Create multimedia message: send an

MMS message to the highlighted phone

number or e-mail address.

•

Play: play the sound file attached to the

message.

•

Print via Bluetooth: print the message by

connecting the phone to a printer via

Bluetooth.

Delivery reports

•

Call back: dial the phone number of the

sender.

•

Save to Contacts: save the sender’s phone

number to Contacts. If a phone number,

e-mail address, or URL address within the

message is selected, you can also save it to

Contacts.

Some printers may not be compatible with

your phone

•

Delete: delete the message.

Details: access the message properties.

•

Delete: delete the report.

Push messages

•

Go to URL/Go to RTSP: connect to the URL

specified in the message.

Drafts (Menu 6.3)

This folder stores messages you have saved to

send them at a later time.

From the message list, press <Options> to

access the following options:

•

Delete: delete the message.

Configuration messages

•

Install: apply the configuration value in the

message to your phone.

Delete: delete the message.

•

View: open the selected MMS message.

Edit: edit the selected message.

Send: send the message.

•

Menu functions

•

Sort By: change the sort order of the

message list.

•

Sort by: change the sort order of the

message list.

•

Delete: delete the selected message.

Delete all: delete all messages.

•

Delete: delete the selected message.

Delete all: delete all messages.

Details: access the MMS message

properties.

Outbox (Menu 6.4)

This folder stores messages that the phone is

attempting to send or has failed to send.

Sent box (Menu 6.5)

This folder stores messages that you have sent.

From the message list, press <Options> to

access the following options:

The following icons on the message list

indicates the sending status:

•

Being sent

Failed to be sent

•

View: open the selected message.

Forward: forward the message to other

people.

From the message list, press <Options> to

access the following options:

•

View: open the selected MMS message.

Send again: resend the message.

Edit: edit the message.

Cancel sending: cancel sending the

message.

•

Sort by: change the sort order of the

message list.

Delete: delete the selected message.

Delete all: delete all messages.

Details: access the message properties.

•

Using e-mail options

Email inbox (Menu 6.6)

While viewing the e-mail or header, press

This folder stores e-mails that you have

received.

Options> to access the following options:

Call Go to URL Go to RTSP: dial the

•

Viewing received e-mails

highlighted phone number or access the

highlighted web link.

1. Press <Options> and select Download

The phone checks the e-mail server and

downloads new e-mails.

•

Add to bookmarks: save the highlighted

web link to the bookmark list.

Create email: send an e-mail to the

highlighted e-mail address.

Create multimedia message: send an

MMS message to the highlighted e-mail

address

2. Select an e-mail or a header.

3. If the e-mail has more than one page, press

] to scroll through pages one by one.

[

4. Select an attached file to view or play it.

Depending on the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

•

View: open the selected e-mail.

Retrieve: retrieve the body of the selected

e-mail header from the e-mail server.

•

Reply: send a reply to the sender.

Reply to all: send a reply to the sender and

all recipients.

Menu functions

•

Forward: forward the e-mail to other

people.

Download: download new e-mails or

headers from the e-mail server.

Sort by: change the sort order of the e-mail

list.

Save files: save the selected file.

Save to Contacts: extract phone numbers

or e-mail addresses from the e-mail and

save them in Contacts.

Block: add the sender’s e-mail address or

e-mail subject to the Block list to reject

e-mails from that address or containing that

subject.

Delete from phone: delete the selected

e-mail or all e-mails from the phone’s

memory.

Delete permanently: delete the selected

e-mail or all e-mails from both the phone’s

memory and the e-mail server.

•

Email accounts: change the active e-mail

account.

Print via Bluetooth: print the e-mail by

connecting the phone to a printer via

Bluetooth.

•

Some printers may not be compatible with

your phone

•

Details: access the e-mail properties.

Templates (Menu 6.7)

•

Use this menu to create, edit, and send SMS

templates and MMS templates.

Text templates (Menu 6.7.1)

•

You can create SMS templates with the

sentences you use frequently so that you can

retrieve and insert them when composing an

SMS message.

Creating a template

1. Press <Options> and select New

2. Enter a message and press [ ].

1. Press <New>, or press <Options> and

select New, if one has been already stored.

2. Create a template as you would when

creating an MMS message.

3. Press [ ] save the template.

Using template options

From the template list, press <Options> to

access the following options:

Using template options

From the template list, press <Options> to

access the following options:

•

Send: create and send a new message using

the template via SMS, MMS, file messenger,

or e-mail.

•

Edit: change the selected template.

New: add a new template.

Delete: delete the selected template.

Delete all: delete all templates.

•

View: open the selected template.

Send: send the selected template via MMS.

New: add a new template.

Edit: edit the selected template.

Delete: delete the selected template.

Delete all: delete all templates.

Multimedia templates (Menu 6.7.2)

You can create MMS templates so that you can

use them in composing an MMS message.

Menu functions

•

Create email: send an e-mail to the

highlighted e-mail address.

Save: save the message in the Archive

folder.

Broadcast (Menu 6.8)

Your phone receives broadcast messages, which

are text messages related to various topics,

such as weather forecast, traffic, and news

report, from networks. Use this menu to access

received broadcast messages.

Delete: delete the message.

Delete all (Menu 6.9)

Viewing a broadcast message

Use this menu to delete messages in each

message type at once.

All broadcast messages are stored in the

Temporary folder and will be deleted after a

period of time. If you do not want a message to

be deleted, save it to the Archive folder. While

viewing the message, press <Options> and

1. Press [ ] to select the message types to be

cleared.

2. Press <Delete>.

select Save

3. Press <Yes> to confirm the deletion.

Using message options

Settings (Menu 6.0)

While viewing a message, press <Options> to

access the following options:

Use this menu to set up various options for

using messaging services.

•

Call/Go to URL/Go to RTSP: dial the

highlighted phone number or access the

highlighted web link.

Network selection: select CS preferred

(GSM) or PS preferred (GPRS), depending

on your network.

Keep a copy: leave copies of your

messages in the Sent box folder after

sending.

Text message (Menu 6.0.1)

You can configure SMS settings.

•

Settings x: set the properties of each

profile:

Centre address: store or change the

number of your SMS server.

Expiration: set the length of time your

messages are stored in the SMS server.

Default type: set the default message type.

The network can convert messages into the

selected format.

Character support: select a character

encoding type. When you select Automatic

the phone switches the encoding type from

GSM alphabet to Unicode if you enter a

unicode character. Use of Unicode encoding

will reduce the maximum number of

Name: enter a profile name.

characters in a message to about half. If this

menu is not shown, your phone provides the

automatic character encoding by default.

•

Sending settings: set up the options for

sending SMS messages:

Reply path: allow recipients to reply to you

Multimedia message (Menu 6.0.2)

through your SMS server.

You can configure MMS settings.

Delivery report: set the network to inform

you when your messages are delivered.

•

Sending options: set up the options for

sending MMS messages:

Priority: set the priority level of messages.

Menu functions

Expiration: set the length of time messages

are stored in the MMS server.

Custom time(Hour): enter the length of

time you want if you select Custom time in

the Expiration option.

Add my name card: allow your contact

information to be attached to your messages

via File messenger.

Add signature: allow your signature to be

attached to your message via File

messenger.

Delivery: set a time delay before messages

are sent.

Input signature: enter your signature.

Custom time(Hour): enter the length of

time you want if you select Custom time in

the Delivery option.

Hide address: set your address to be

hidden from the recipient’s phone.

•

Receiving options: set up the options for

receiving MMS messages:

Home network: determine if your phone

retrieves new messages automatically when

you are in your home service area.

Request delivery report: set the network

to inform you when your messages have

been delivered.

Roaming network: determine if your

phone retrieves new messages automatically

when you are roaming in another network.

Request read report: send a read-replay

request along with your messages.

Reception within your home network or while

roaming has the following options:

Keep a copy: leave copies of your

messages in the Sent box folder after

sending.

Auto download: the phone automatically

retrieves messages from the server.

Manual: the phone receives notifications

first from the server. Use the Retrieve

option to manually retrieve new messages.

•

Message size: select a maximum file size of

allowed for messages. Available message

size may vary, depending on your country.

Creation mode: select an MMS creation

mode:

Warning: you can create a message with

any type of content and of any size, but the

phone will inform you when the content and

size exceed the maximum.

Free: you can create a message with any

type of content and of any size.

Restricted: the phone receives

notifications first from the server. When

you attempt to retrieve new messages, the

phone informs you of additional charges.

Send delivery report: set the network to

inform the sender when a message has been

delivered to you.

Send read report: determine whether or

not the phone sends a read-reply when an

incoming message has been read.

Reject anonymous: reject messages from

unknown senders.

Reject advertisement: reject

advertisements.

Restricted: you can create a message with

any type of contents and size.

Slide interval: select the length of time the

display shows each page in a message.

•

Email (Menu 6.0.3)

•

MMS profiles: select a connection profile to

You can configure e-mail settings.

be used for MMS. You can also create or edit

You cannot change e-mail profile settings while

an e-mail is being sent or retrieved.

a profile.

ꢀp. 120

Menu functions

•

Sending options: set up the options for

sending e-mails:

•

Receiving options: set up the options for

receiving e-mails:

From: set the sender name.

Sending account: select the default

account.

Priority: select the priority level of e-mails.

Keep a copy: leave copies of your e-mails

in the Sent box folder after sending.

Include body when replying: set whether

or not the phone includes the original e-mail

text in a reply.

Delivery report: set the network to inform

you when your e-mails are delivered.

Add my name card: allow your contact

information to be attached to e-mails.

Add signature: attach your signature to

e-mails.

Input signature: enter your signature.

Set download limit: determine the

maximum size for incoming e-mails. Your

phone will reject e-mails that exceed the

specified size.

Auto polling: set the phone to

automatically check the e-mail server to

download e-mails at the specified intervals.

Polling frequency: set how often the

phone checks the e-mail server for

automatic polling.

Block address: specify e-mail addresses to

reject e-mails from those addresses, and

activate or deactivate mail blocking.

Block subject: specify subjects to reject

e-mails which contain those subjects you

specify, and activate or deactivate mail

blocking.

•

Email profiles: select a network connection

POP3 port/IMAP4 port: enter the POP3 or

IMAP4 port number.

Use SSL: activate the use of the SSL

(Secure Sockets Layer) protocol.

IMAP4 retrieving option: (IMAP4 protocol

only): set whether the phone retrieves only

new messages or all messages.

profile to be used for e-mail services. You

can also create or edit a profile.ꢀp. 120

Email accounts: set up an e-mail account

and select an account to be used. Press

Options> and select Edit to access the

following options for setting up an account:

Account name: enter a name for the

Retrieving option: set wether the phone

downloads e-mail headers only or the

complete e-mail.

Keep in server: leave the copies of e-mails

on the e-mail server after retrieving.

My address: set your e-mail address.

User name: enter the POP3 or IMAP4 user

name.

Password: enter the POP3 or IMAP4

password.

currently selected account.

SMTP server: enter the IP address or host

name of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

Use SSL: activate the use of the SSL

(Secure Sockets Layer) protocol.

Retrieving server type: select the protocol

for the incoming e-mail server. The

remaining options depend on the protocol

type setting.

POP3 server/IMAP4 server: enter the IP

address or host name of the POP3 or IMAP4

server.

Use SMTP Authentication: enable SMTP

authentication, which requires the user to

Menu functions

Same as POP3/IMAP4: select if you want

the SMTP server to have the same

parameters as the POP3 or IMAP4 server.

•

Service loading: whether or not your

phone automatically launches the web

browser as a push message comes in.

User name: enter the SMTP user name.

Password: enter the SMTP password.

Broadcast (Menu 6.0.6)

You can change the settings for receiving

broadcast messages.

Voice mail (Menu 6.0.4)

•

Receive: select whether or not the phone

receives broadcast messages.

Use this menu to set the number of your

voicemail server.

•

Channel: indicate the channels from which

you wish to receive broadcast messages.

Please contact your service provider for

further details.

You must store the voicemail server number

before accessing the server. Your service

provider can give you the number.

•

Language: select the preferred languages

in which broadcast messages display.

Push message (Menu 6.0.5)

You can change the settings for receiving push

messages from the wireless web server.

Memory status (Menu 6.*)

•

Receiving option: set whether or not the

phone receives push messages.

Use this menu to view the number of messages

or the amount of memory currently in use for

each message type in each folder.

Creating an item

Organiser (Menu 7)

You can store scheduled items, anniversaries,

tasks, and memos on the calendar. More than

one item per day can be stored.

The Organiser feature enables you to keep

track of your schedule.

To access this menu, press <Menu> in Idle

mode and select Organiser

Entering a scheduled item

1. Select a date on the calendar.

Calendar (Menu 7.1)

2. Press <Options> and select New

Schedule

3. Enter information or change the settings:

→

Use this menu to keep track of your schedule.

Selecting a day on the calendar

•

Title: enter the title for the scheduled

item.

Details: enter the details of the

scheduled item.

Start and End: enter the starting and

ending times for the scheduled item.

Start date and End date: enter the

starting and ending dates for the

scheduled item.

When you enter the Calendar menu, the

calendar appears with today’s date indicated by

a coloured box.

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

Press [

] to move by month.

Menu functions

•

Location: enter information about the

scheduled item.

Alarm: set an alarm for the scheduled

item.

before: set how long before the

scheduled item the alarm is to alert you.

Repeat: set the scheduled item to recur.

You can select a repeat unit.

3. Enter information or change the settings:

•

Occasion: enter information about the

anniversary.

•

Date: enter the date.

Alarm: set an alarm for the anniversary.

before: set how long before the

anniversary the alarm is to alert you.

•

alarm time: enter the time for the alarm

until: set the ending date, if the

scheduled item will recur.

Expiry: change the expiry setting.

to sound.

Repeat every year: set the phone to

remind you of the anniversary every year.

4. Press <Options> and select Save to save

the scheduled item.

4. Press <Options> and select Save to save

the anniversary.

Entering an anniversary

Entering a task

1. Select a date on the calendar.

2. Press <Options> and select New

Anniversary

→

2. Press <Options> and select New

→

Task.

3. Enter information or change the settings:

Consulting the calendar

•

Title: enter the title for the task.

Task: enter the task content.

Start date: enter the starting date.

Due date: enter the ending date.

Priority: select a priority level.

Once you have scheduled items, the square

brackets appear on the corner of the date cell.

Viewing an item

1. Select a date on the calendar to display the

items for the day. The following icons

indicate the type of item:

4. Press <Options> and select Save to save

the task.

•

Scheduled items

Anniversaries

Tasks

Entering a memo

1. Select a date on the calendar.

2. Press <Options> and select New

Memos

→

Memo.

2. Select an item to view its details.

From the item list, press <Options> to access

the following options:

3. Enter the memo text and press [Down].

4. Enter the date.

5. Press <Options> and select Save to save

the memo.

•

View: access the item.

New: add a new item.

Completed

/To do: change the status of the

selected task.

Menu functions

•

Month view: switch to the monthly view

screen.

Week view: switch to the weekly view

screen.

Using calendar options

On the calendar, press <Options> to access

the following options:

•

View: display the items stored for the

selected date.

Change date

Change due date

Reschedule: change the date of the item.

•

New: add a new item.

Week view: display the weekly view

screen.

•

Delete: delete the selected item.

Delete all: delete all of the items for the

selected day.

Send schedule/Send task: send the item

via SMS or Bluetooth.

Send memo: send the memo via SMS.

Print via Bluetooth: print the item by

connecting the phone to a printer via

Bluetooth.

•

Go to today: go to today’s date.

Go to date: enter a specific date.

Start date: set whether the calendar starts

with Sunday or Monday.

•

Delete: delete the items for the specific

period.

Delete all: delete all of the items in the

calendar.

Some printers may not be compatible with

the phone.

Week view (Menu 7.2)

Anniversary (Menu 7.5)

You can view items for the selected week. A

coloured box on the timetable indicates the

presence of a scheduled item. Select a box for

the date you want.

This menu displays anniversaries you have

created. If you have set the Repeat and Alarm

options, the

and

icons display.

Select an anniversary to view its details.

Today’s events (Menu 7.3)

Task (Menu 7.6)

You can view items for the selected date.

Select an item to view its details. The item

opens in Edit mode.

Use this menu to display tasks you have

created. The icons on the right indicate the

importance; the lower the number on the icon,

the higher the priority. A check mark appears in

the status check box if the task has been

completed.

Schedule (Menu 7.4)

This menu displays the scheduled items. If you

have set the Repeat and Alarm options, the

Select a task to view its details.

and

icons display.

Select a scheduled item to view its details.

Menu functions

Memo (Menu 7.7)

Camera (Menu 8)

This menu displays memos you have created.

Select a memo to view its details.

You can use the camera module embedded in

your phone to take photos and record videos.

To access this menu, press <Menu> in Idle

mode and select Camera

Missed event alarm (Menu 7.8)

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras

are not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

When you are unable to acknowledge an alarm

for an item, the phone stores the missed alarm

until you confirm it.

1. Select an item.

2. Press <Confirm> to confirm and delete the

item.

Taking a photo

Memory status (Menu 7.9)

You can take photos in various modes. The

camera produces jpeg photos.

This menu displays the number of items of each

type you have created, and the total number of

items you can store.

When you take a photo in direct sunlight or in

bright conditions, shadows may appear on the

photo.

Taking a photo

Press

1. Access the Camera menu to turn on the

camera. You can also press and hold [ ] in

Idle mode.

send the photo via

MMS

[

ꢀp. 60

2. Press [ ] to switch between the interior

lens below the display and exterior lens on

the external of the phone.

return to Capture

mode

Using camera options in Capture mode

3. Make any desired adjustments.

•

Press <

> to use camera options.

In Capture mode, press <

following options:

> to access the

ꢀ

next section

•

Use the keypad to change the camera

settings or switch to other modes.

•

Take photo: take a photo.

Record video: switch to Record mode.

Switch camera: switch between the interior

lens and exterior lens.

Go to photos: access the Pictures folder.

Shooting mode: take a photo in the

following modes:

ꢀ

p. 87

4. Press [ ] to take a photo. The photo is

saved in the Pictures folder.

•

Press

] and then <Yes>.

use photo options

delete the photo

ꢀp. 88

Single shot: take a photo in Normal mode.

You can select whether or not the camera

automatically saves a photo.

Menu functions

Multi shot: take a series of action stills. You

can select the number of photos the camera

will take.

Mosaic shot: take several stills and save

them in one frame. You can select the

layout. Press [ ] to take each photo.

Default name: change the default prefix of

file names.

Default storage: select the memory

location to store photos, if a memory card is

inserted.

Viewfinder: select a preview screen.

Scene programs: set whether to use Night

shot mode.

•

Effects: change the colour tone of the

image.

•

Frames: apply a decorative frame.

Timer: set a time delay before the camera

takes a photo.

Shutter sound: select the sound that you

hear when you press the shutter release key.

Capture quality: select an image quality.

Image size: select an image size.

Multi shot speed: select the shooting

speed in Multi Shot mode.

Spot metering: adjust the exposure based

on a specific area of the image. Select On to

display the spot focus frame in the middle of

the image, and change the exposure

according to the brightness of the image

fragment in the frame.

•

Zoom/Hide zoom: display the zoom control

bar and zoom in or out by pressing [Up] or

[Down], or hide the control bar.

Brightness/Hide brightness: display the

brightness control bar and adjust the

brightness by pressing [Left] or [Right], or

hide the control bar.

Camera settings: change the default

settings for taking a photo:

•

White balance: adjust the colour

Key

Function

temperature of the camera. Depending on

the current lighting conditions, you can

make the video look warmer or cooler.

Switches to Record mode.

ꢀ

p. 88

•

Camera shortcuts: view the functions of

the keys you can use in Capture mode.

Changes the image size.

Changes the image quality.

Changes the shooting mode.

Using the keypad in Capture mode

You can use the keypad to customise your

camera settings in Capture mode.

Changes the colour tone or

applies a special effect.

Key

Left/Right Adjusts the brightness.

Up/Down Zooms in or out. (Not available

Function

Changes the white balance.

Adds a decorative frame.

Sets the timer.

for the maximum size)

Flips the image vertically.

Shows the mirror image.

Switches to Night shot mode.

Goes to the Pictures folder.

Changes the preview screen.

Menu functions

Using photo options

Recording a video

After saving a photo, press <

following options:

> to access the

You can record a video of what is displayed on

the camera screen and save it.

•

View: access one of the multi-shot photos.

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth.

Recording a video

1. Access the Camera menu to turn on the

camera. You can also press and hold [ ] in

Idle mode.

•

Viewfinder: return to Capture mode.

Delete: delete the file, or all of the

multi-shot photos.

2. Press [1] to switch to Record mode.

3. Press [ ] to switch between the interior

lens below the display and exterior lens on

the external of the phone.

•

Set as: set the photo as wallpaper for

displays, or as a caller ID image for a

Contacts entry.

•

Go to Photos: access the Pictures folder.

4. Make any desired adjustments.

ꢀ

p. 92

•

Press <

> to use camera options.

ꢀ

next section

Rename: change the file name.

•

Use the keypad to change the camera

settings or switch to other modes.

ꢀ

p. 90

5. Press [ ] to start recording.

6. Press [ ] to stop recording. The video is

saved in the Videos folder.

•

Effects: change the colour tone of the

image.

Zoom/Hide zoom: display the zoom control

bar and zoom in or out by pressing [Up] or

[Down], or hide the control bar.

Press

Options>.ꢀp. 91

use video options

delete the video clip

•

Brightness/Hide brightness: display the

[C] and then <Yes>.

brightness control bar and adjust the

brightness by pressing [Left] or [Right], or

hide the control bar.

return to Record

mode

<Back>.

Video settings: change the following

settings for recording a video:

Default name: change the default prefix of

file names.

Default storage: select the memory

location to store video clips, if a memory

card is inserted.

Quality: select an image quality.

Recording time: select a video recording

mode.

Select Limit for MMS to record a video

suitable for an MMS message.

Using camera options in Record mode

In Record mode, press <

following options:

> to access the

•

Record: start recording.

Take photo: switch to Capture mode.

Switch camera: switch between the interior

camera lens and exterior camera lens.

•

Go to Videos: access the Videos folder.

ꢀ

p. 94

Menu functions

Select Normal to record a video within the

limit of the currently available memory. The

length of your video is determined by how

much memory has been used.

Size: select a frame size.

Audio record: turn the audio on or off.

Key

Function

Flips the image vertically.

Shows the mirror image.

Switches to Capture mode.

ꢀ

p. 84

White balance: adjust the colour

temperature of the camera. Depending on

the current lighting conditions, you can

make the video look warmer or cooler.

Camcorder shortcuts: view the functions

of the keys you can use in Record mode.

Changes the frame size.

Changes the image quality.

•

Changes the video recording

mode.

Using the keypad in Record mode

Changes the colour tone or

applies a special effect.

You can use the keypad to customise your

camera settings in Record mode.

Changes the white balance.

Mutes or unmutes audio.

Goes to the Videos folder.

Key

Left/Right Adjusts the brightness.

Up/Down Zooms in or out.

Function

Using video options

Tips for Digital Rights Management

After saving a video clip, press <Options> to

As a result of the Digital Rights Management

(DRM) system, some of the media items you

download from the Internet or receive by MMS

may require a licence key to access them.

access the following options:

•

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth.

You can acquire the key from the website which

owns the rights to the content; use the

Activate key option.

•

Play: play back the file.

Viewfinder: return to Record mode.

Delete: delete the file.

Note the following icons on the list:

Go to Videos: access the Videos folder.

•

: Forwardable item with a valid key.

: Forwardable item without a valid key.

: Unforwardable item with a valid key.

: Unforwardable item without a valid

key.

ꢀ

p. 94

•

Rename: change the file name.

File manager (Menu 9)

The File manager menu allows you to access

images, videos, music files, and sounds stored

in the phone’s memory or on a memory card.

Your phone supports only count-based or

unlimited-access DRM files.

To access this menu, press <Menu> in Idle

mode and select File manager

Menu functions

Editing an image

Images

1. While viewing an image, press <Options

Use this menu to access photos you have taken

and images you have downloaded, received in

messages, or imported from your computer.

and select Edit

2. Press <Options> and edit the photo using

the following options:

Viewing an image

•

Save as: save the file as a different

name.

1. Scroll to an image folder.

2. Select an image.

•

Resize: change the image size.

Effects: change the colour tone or apply

a special effect to the photo.

Viewing a slide show

•

Adjust: adjust the brightness, contrast,

You can view your images as a slide show, a

sequential presentation of each image in the

current folder.

or colour balance.

•

Frames: apply a decorative frame.

Cliparts: add an image clip to the photo.

Insert text: add text to the photo.

Rotate: rotate the photo clockwise or

counterclockwise.

1. While viewing an image, press <Options

and select Slide show. The slide show

begins.

2. Press <Back> to stop the slide show.

•

Flip: flip the photo vertically or

horizontally.

•

Crop: select a variously sized and shaped

section of the photo.

•

Visible to Bluetooth/Hidden from

Bluetooth: share the file with other

Bluetooth devices, or hide the file so that

other Bluetooth devices cannot access it.

3. When you have finished, press <Done> or

press <Options> and select Done

4. Press [ ].

5. Enter a photo name and press <Save>.

•

Delete: delete the file.

Set as: set the image as your wallpaper for

the displays or a caller ID image for a

Contacts entry.

Move: move the file to another folder.

Copy: copy the file to another folder.

Real size: view the image in its actual size.

Press <Phone size> to fit the image to the

display.

Slide show: view all images as a slide

show.

Activate key: get a new licence key when

the key for the selected DRM file expires.

Reactivate key: get another licence key

even when the key for the selected DRM file

has not expired.

Using image options

•

While viewing a file, press <Options> to

access the following options:

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth.

Print via: print the image by connecting the

phone to a printer via USB or Bluetooth.

•

Some printers may not be compatible with

the phone.

Menu functions

•

Edit: edit the image and save it as a

different file.

Rename: change the file name.

Details: access the file properties.

Key management: manage licence keys

you have acquired.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

•

Playing a video clip

1. Scroll to a video folder.

2. Select a video clip. The media player opens.

ꢀ

p. 50

Downloading images

Using video options

1. Scroll to the Downloads folder.

2. Select More pictures. You are connected to

the website preset by your service provider.

From the video list, press <Options> to access

the following options:

•

Play: play the video clip.

Add to play list: add the file to the play list.

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth.

3. Search for the file you want and follow the

onscreen instructions to download it.

Videos

•

Visible to Bluetooth/Hidden from

Use this menu to access video clips you have

recorded, downloaded, received in messages,

or imported from your computer.

Bluetooth: share the file with other

Bluetooth devices, or hide the file so that

other Bluetooth devices cannot access it.

•

Delete: delete the selected file or all files.

Activate key: get a new licence key when

the key for the selected DRM file expires.

Reactivate key: get another licence key

even when the key for the selected DRM file

has not expired.

Move: move the file to another folder.

Copy: copy the file to another folder.

Rename: change the file name.

Downloading video clips

1. Scroll to the Downloads folder.

2. Select More videos. You are connected to

the website preset by your service provider.

3. Search for the file you want and follow the

onscreen instructions to download it.

•

Music

This menu displays music files you have

downloaded or received in messages.

Lock/Unlock: lock the file to prevent it from

being deleted, or unlock the file.

New folder: add a new folder.

Details: access the file properties.

Memory status: access the memory

information for each folder in File manager

Key management: manage licence keys

•

Playing a music file

Select a music file. The media player opens.

ꢀ

p. 50

Using music options

•

you have acquired.

From the music list, press <Options> to access

the following options:

•

Play: play the music file.

Menu functions

•

Add to play list: add the file to the play list.

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth.

•

New folder: add a new folder.

Details: access the file properties.

Memory status: access the memory

•

Visible to Bluetooth

/Hidden from

information for each folder in File manager

Bluetooth: share the file with other

Bluetooth devices, or hide the file so that

other Bluetooth devices cannot access it.

•

Key management: manage licence keys

you have acquired.

Downloading music files

•

Delete: delete the selected file or all files.

Set as ringtone: set the file as your

ringtone for voice calls or video calls.

1. Select More music. You are connected to

the website preset by your service provider.

•

Set as caller ID: set the music file as a

2. Search for the file you want and follow the

onscreen instructions to download it.

ringtone for a Contacts entry.

Activate key: get a new licence key when

the key for the selected DRM file expires.

Reactivate key: get another licence key

even when the key for the selected DRM file

has not expired.

Sounds

Use this menu to access voice memos you have

recorded, and sound clips you have

downloaded, received in messages, or imported

from your computer.

•

Rename: change the file name.

Lock

/Unlock: lock the file to prevent it from

being deleted, or unlock the file.

Playing a sound clip

Using sound options

1. Scroll to a sound folder.

2. Select a sound clip. The selected sound

plays.

From the sound list, press <Options> to

access the following options:

•

Play: play the selected file.

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth.

For a voice memo, see Voice recorder

p. 102

During playback, use the following keys:

ꢀ

•

Visible to Bluetooth/Hidden from

Bluetooth: share the file with other

Bluetooth devices, or hide the file so that

other Bluetooth devices cannot access it.

Key

Function

Left

Returns to the previous file.

Skips to the next file.

Adjusts the volume.

•

Delete: delete the selected file or all files.

Set as ringtone: set the file as your

ringtone for voice calls or video calls.

Right

Up/Down/

•

Set as caller ID: set the sound clip as a

ringtone for a Contacts entry.

Allows you to send the selected

file to other people.

Activate key: get a new licence key when

the key for the selected DRM file expires.

Reactivate key: get another licence key

even when the key for the selected DRM file

has not expired.

Menu functions

•

Move: move the file to another folder.

Copy: copy the file to another folder.

Rename: change the file name.

Games & More

•

Use this menu to access the embedded Java

games and download Java applications.

Lock/Unlock: lock the file to prevent it from

Accessing an applications

being deleted, or unlock the file.

New folder: add a new folder.

Details: access the file properties.

Memory status: access memory

•

Select an application from the application list

and follow the onscreen instructions. The

procedure may differ from application to

application.

information for each folder in File manager

•

Key Management: manage licence keys

you have acquired.

Using Java application options

From the application list, press <Options> to

access the following options:

Downloading sound clips

•

Download: connect to the preset website

and download games or other Java

applications.

1. Select More ringtones. You are connected

to the preset website by your service

provider.

2. Search for the file you want and follow the

onscreen instructions to download it.

•

Play: launch the selected application.

Move: move the game to another folder.

•

Activate key: get a new licence key when

the key for the selected DRM file expires.

•

Memory status: access memory

information for each folder in File manager

Key management: manage licence keys

you have acquired.

Reactive key: get another licence key even

when the key for the selected DRM file has

not expired.

Delete: delete the selected application or

game folder, except for embedded games

and default game folder.

Downloading new applications

•

1. Select More games. You are connected to

the website preset by your service provider.

•

Rename: change the name of the game or

2. Search for the application you want and

follow the onscreen instructions to download

it.

game folder.

Lock/Unlock: lock the application to

prevent it from being deleted, moved, and

renamed, or unlock the application.

Other files

•

Details: access the application properties.

New folder: add a new folder.

Network settings: select a connection

profile to be used for applications requiring

network access. You can also create or edit a

Use this menu to access any other files than

image, video, music and sound files. Your

phone provides you with Picsel File Viewer to

allow you to view, without corruption, various

document files. Available file formats are *.doc,

*. xls, *.ppt, *.pdf, *.txt, and *.html.

profile.

ꢀp. 120

Menu functions

Viewing a document

Key

Function

Select a file. Picsel File Viewer runs and open

the document.

Searches forward through the

document for the text entered

in the Search option.

• Depending on the file size or memory capacity

of Picsel File Viewer, some files may not open

properly.

• If a document file contains languages

unsupported by Picsel File Viewer, the content

of the document will not display correctly.

Returns to the first page.

Searches backward through

the document for the text

entered in the Search option.

Use the following keys to view the document:

Returns to the previous page.

Rotates the document.

Moves to the next page.

Moves to the last page.

Key

Function

Up/Down/

Left/Right

Scrolls to each direction on

the current page.

Zooms in or out.

Changes the display to Full

screen view or Normal screen

view.

Fits the document to the page

size.

100

•

Search: search for text in the document.

Send: send the file via e-mail or Bluetooth.

Hide from Bluetooth/Visible to

Bluetooth: hide the file so that other

Bluetooth devices cannot access it, or share

the file with other Bluetooth devices.

Using document options

While viewing a document, press <Options> or

•

> to access the following options:

Full screen view Normal view: view the

document on a full screen, or return to the

normal screen.

•

Lock/Unlock: lock the file to protect it from

being deleted, or unlock the file.

Details: access the file properties.

FileViewer shortcuts: view the functions

•

Zoom: zoom in or out.

Fit to screen: screen fit the document to

the page size, screen width, or screen

height.

•

of the keys you can use in Picsel File Viewer.

•

Rotate: rotate the document.

Go to: move to another page of the

document.

Memory card

•

Screen panning/Normal panning: change

the page scroll mode. You can scroll by

screen size or scrolling by preset pixel.

Hide controller/Show controller: hide or

display the shortcut tool bar in Full screen

view.

Use this menu to access the files stored on the

memory card. This option is only available when

you insert a memory card into the phone.

For details about using files, see the

corresponding menu.

101

Menu functions

Voice Recorder (Menu *.2)

Applications (Menu *)

Use this menu to record voice memos. A voice

memo can be up to one hour long.

Use this menu to use convenient features, such

as a world clock, a voice recorder, calculator,

and converter.

Recording a voice memo

To access this menu, press <Menu> in Idle

1. Press [ ] to start recording.

mode and select Applications

2. Speak into the microphone.

Press [ ] to pause or resume the recording.

PocketNews (Menu *.1)

3. Press <Stop> or [Down]. The voice memo is

This menu is available if you use a USIM/SIM

card that supports SIM Application Toolkit

menus and provides additional services, such as

news, weather, sports, entertainment, and

location services. Available services may vary,

depending on your service provider’s plans.

saved automatically.

4. Press [ ] to review the memo, or press

[Up] to record additional memos.

Playing a voice memo

For details, see your USIM/SIM card

instructions or contact your service provider.

1. From the voice recorder screen, press

<Options> and select Go to sounds.

2. Select a voice memo from the Voice

memos folder. The memo plays.

102

During playback, use the following keys:

•

Activate key: get a new licence key when

the key for the selected DRM file expires.

Reactivate key: get a new licence key even

when the key for the selected DRM file has

not expired.

Set as ringtone: set the file as your

ringtone for voice calls or video calls.

Set as caller ID: set the file as a ringtone

for a Contacts entry.

Key

Function

Pauses or resumes playback.

Moves backward in a file.

Moves forward in a file.

Adjusts the volume.

Stops playback.

Left

Right

•

Down

Key management: manage licence keys

you have acquired.

Go to sounds: access the voice memo list.

Delete: delete the file.

Rename: change the file name.

Visible to Bluetooth/Hidden from

Bluetooth: share the file with other

Bluetooth devices or hide the file so that

other Bluetooth devices cannot access it.

Using voice recorder options

•

After playback, press <Options> to access the

following options:

•

Play: play the selected voice memo in

Review mode.

•

Record: record a new voice memo.

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth.

•

Details: access the file properties.

103

Menu functions

•

Record settings: customise the default

settings for the voice recorder:

Default name: change the default prefix of

file names.

Recording time: select a maximum

recording time.

Viewing world time

1. From the world map, move to the lower line

(

2. Press [Left] or [Right] to scroll to the city

you want.

3. Press [ ] to save the time zone.

World clock (Menu *.3)

Using world clock options

Use this menu to set your local time zone and

find out the current time in another part of the

world.

From the world map, press <Options> to

access the following options:

•

Save: save the selected foreign time zone.

Summer time: apply daylight saving time

to the time zone you want.

Setting the local time zone

1. From the world map, press [Left] or [Right]

to scroll to the city you want on the upper

•

Display settings: select a clock type to be

displayed on the idle screen.

line (

). As the time line moves, the time

and date of the given zone display.

2. Press [ ] to save the city as your local time

zone.

You cannot display the dual clock and

calendar in Idle mode at the same time.

Whichever you select last will be displayed.

104

•

Recent calculation: display the last result

you calculated.

Save to memory: save a value into the

calculator memory.

Recall memory: retrieve the saved value.

Clear memory: clear the saved value.

Calculator (Menu *.4)

Use this menu to perform basic arithmetic

functions such as addition, subtraction,

multiplication, and division.

•

Performing a calculation

1. Enter the first number.

Press [ ] to include a decimal point.

Converter (Menu *.5)

2. Press one of the Navigation keys to access

the math function you want.

Use this menu for common conversions, such

as currency and temperature.

3. Enter the second number.

4. Press [ ] to view the result.

5. If necessary, repeat from step 2 to continue

the calculation.

Performing a conversion

1. Select a converter.

2. Press [Left] or [Right] to select the original

unit and press [Down].

Using calculator options

3. Enter the value to be converted and press

[Down].

Press <Options> to access the following

options:

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to

above zero (+) or below zero (-).

•

Equal: view the result.

105

Menu functions

4. Press [Left] or [Right] to select the unit to

which you want to convert.

The equivalent value for the amount you

entered displays.

Alarms (Menu 0)

Use this menu to set alarms to sound at specific

times. The alert type for a normal alarm

corresponds to the call alert type settings in the

currently selected profile. A wake-up alarm is

not be affected by your profile setting.

To access this menu, press <Menu> in Idle

mode and select Alarms

Using converter options

Press <Options> to access the following

options:

•

Clear: clear the current values.

Reverse: reverse the conversion.

Currency rates: display the currency rate

list.

Setting an alarm

1. Select the type of alarm.

2. Set each alarm option:

•

Alarm: activate the alarm.

Time: enter the time for the alarm to

sound.

•

Repeat: select a repeat option.

Alert tone: select an alarm tone.

3. Press [ ].

106

Stopping an alarm

Settings (Menu #)

When the time for an alarm comes and the

alarm sounds:

The Settings menu provides you with various

setting options to customise the phone to your

preferences and needs. You can also reset the

settings to their default status.

•

For a non-wake-up alarm, press any key.

For a wake-up alarm, press <OK> or [ ].

Press any key, except for <OK> and [ ], to

cause it to sound again after 5 minutes.

To access this menu, press <Menu> in Idle

mode and select Settings

Profiles (Menu #.1)

Deactivating an alarm

Your phone provides you with sound profiles

that allow you to quickly and easily change the

sound settings of the phone for different events

or situations. Use this menu to adjust the

properties of each profile and activate the

profile you need.

1. Select the alarm you want to deactivate.

2. Select Off on the Alarm line.

3. Press [ ].

Setting alarms to sound when the

phone is off

Editing a profile

From the Alarms screen, select Auto power

→

1. Scroll to the profile you want.

If the phone is off when it is time for the alarm

to sound, the phone switches on and sounds

the alarm.

2. Press <Options> and select Edit

3. Change the sound settings:

107

Menu functions

•

Call alert type: select an alert type for

the call ringer.

Voice call ringtone: select a ringtone

for voice calls.

Video call ringtone: select a ringtone

for video calls.

Tone volume: adjust the volume for the

call ringer.

Message alert type: select an alert type

for the message ringer.

Message alert tone: select a ringtone

for the message ringer.

Message alert repetition: select if the

phone repeatedly reminds you of a new

message.

Phone sounds: turn the various sounds

on the phone on or off:

Power on/off: set the phone to beep

when you turn it on or off.

Folder open/close: set the phone to

sound when you open or close it.

Minute minder: set the phone to beep

every minute during an outgoing call to

keep you informed of the length of your

call.

Call connect tone: set the phone to

beep when an outgoing call is connected

to the system.

Call end tone: set the phone to beep

when a call is disconnected by the other

person or due to a faded signal.

Alerts on call: set the phone to beep

when you receive a new message or when

the time for an alarm comes during a call.

•

Key tones: select a tone which sounds

when you press a key.

All on: enable all tones.

Popup box alerts: set the phone to beep

when a pop-up window displays.

108

•

Key tone volume: adjust the volume of

the key tones.

Call answer mode: (For Car) select how

to answer an incoming call.

Prompt first: your phone will read the MCC

(Mobile Country Code) from the network and

automatically update the current time for the

country that you are in when you travel

abroad.

Before updating, the phone asks you to

update the current time and date. Before

updating, the phone will ask you if you want

to update time information.

4. When you have finished, press <Options

and select Save

Changing an active profile

From the profile list, select the profile you want.

Time information may not be updated when

you move to one time zone to another within

a country.

Time & date (Menu #.2)

Use this menu to change the time and date

displayed on your phone. Before setting the

time and date, specify your time zone in the

Automatic: your phone will receive time

information from the network.

Manual only: you can set the time and date

manually.

Summer time: select to apply daylight

saving time.

Time: enter the current time. To select AM

or PM for 12-hour time format, press

[Right].

World clock menu.

Time zone updating: select a mode for

updating the current time and date.

ꢀp. 104

•

109

Menu functions

•

Date: enter the current date.

Assigning a shortcut menu

•

Time format: select a time format.

Date format: select a date format.

1. Select a key to be used as a shortcut key.

2. Select a menu to be assigned to the key.

Using shortcut options

On the Shortcuts screen, press <Options> to

access the following options:

Phone (Menu #.3)

Many different features of your phone’s system

can be customised to suit your preferences.

•

Assign: assign a shortcut menu.

Change: change a shortcut menu

assignment.

Language (Menu #.3.1)

Use this menu to select a language for the

display text or T9 input mode. If you select

Automatic for the screen text, the phone uses

the same language as the USIM/SIM card.

•

Remove: deactivate the shortcut

assignment to the selected key.

Remove all: deactivate all shortcut

assignments.

Shortcuts (Menu #.3.2)

Active folder (Menu #.3.3)

You can use the Navigation keys as shortcut

keys to access specific menus directly from Idle

mode. Use this menu to assign a shortcut to a

key.

Use this menu to answer incoming calls by

opening the phone.

110

•

Go to File manager: access the

corresponding file folder.

Details: access the properties of the licence

key.

Anykey answer (Menu #.3.4)

Use this menu to answer an incoming call by

pressing any key, except for <Reject> and

[

Cover keypad lock (Menu #.3.7)

Volume key (Menu #.3.5)

Use this menu to lock the exposed keys to keep

accidental presses from affecting your phone’s

operation when the phone is closed.

Use this menu to set whether the phone mutes

the call ringer or rejects a call if you press and

hold [

] when a call comes in.

Key management (Menu #.3.6)

Display (Menu #.4)

Use this menu to manage the licence keys you

have acquired to activate media contents locked

by DRM systems.

Press <Options> to access the following

options:

Use this menu to change settings for the

display.

Greeting message (Menu #.4.1)

Use this menu to enter the greeting that is