Intel SG 80 User Manual

SG-80 Series  
(SG-80, SG-81)  
Intel Pentium 4 System Board  
Socket 775  
User’s Manual  
Rev. 1.00  
Table of Contents  
Chapter 1. Introduction .................................................... 1-1  
1.1. Features & Specifications.......................................................1-1  
1.2. Layout Diagram (SG-80)........................................................1-3  
1.3. Layout Diagram (SG-81)........................................................1-4  
1.4. Jumpers & Connectors Description........................................1-5  
Chapter 2. Hardware Setup.............................................. 2-1  
2.1. CPU Socket ............................................................................2-1  
2.2. System Memory .....................................................................2-2  
2.3. Connectors, Headers, and Switches .......................................2-3  
2.3.1. ATX Power Connectors (ATX_POWER, ATX12V) 2-3  
2.3.2. FAN Connectors (CPUFAN, SYSFAN, PWRFAN).2-4  
2.3.3. CMOS Memory Clearing Header (CCMOS)...........2-5  
2.3.4. Front Panel Switches & Indicators Connection  
Headers (PANEL1)...................................................2-6  
2.3.5. Additional USB Port Connection Header (USB3,  
USB4) .......................................................................2-7  
2.3.6. Front Panel Audio Connection Header  
(FPIO-AUDIO1).......................................................2-8  
2.3.7. Accelerated Graphics Port Slot (AGP1)...................2-9  
2.3.8. Internal Audio Source Connectors (CD1, AUX1)..2-10  
2.3.9. Floppy Disk Drive Connector (FDC) ..................... 2-11  
2.3.10. IDE Disk Drive Connectors (IDE1, IDE2).............2-12  
2.3.11. Serial ATA connectors (SATA1, SATA2) ...............2-13  
2.3.12. External I/O Panel...................................................2-14  
Chapter 3. BIOS Setup...................................................... 3-1  
3.1. About the Setup Utility...........................................................3-1  
3.1.1. The Standard Configuration .....................................3-1  
3.1.2. Entering the Setup Utility.........................................3-2  
3.1.3. Updating the BIOS ...................................................3-3  
User’s Manual  
3.2. Using BIOS ............................................................................3-4  
3.2.1. Standard CMOS Features .........................................3-4  
3.2.2. Advanced BIOS Features .........................................3-7  
3.2.3. Advanced Chipset Features ....................................3-10  
3.2.4. Integrated Peripherals.............................................3-14  
3.2.5. Power Management Setup......................................3-18  
3.2.6. PnP/PCI Configurations..........................................3-20  
3.2.7. PC Health Status.....................................................3-22  
3.2.8. Frequency Control ..................................................3-23  
3.2.9. Load Fail-Safe Defaults Option..............................3-23  
3.2.10. Load Optimized Defaults Option ...........................3-24  
3.2.11. Set Password...........................................................3-24  
3.2.12. Save & Exit Setup Option.......................................3-25  
3.2.13. Exit Without Saving................................................3-25  
Chapter 4. Driver Installation.......................................... 4-1  
4.1. Setup Items.............................................................................4-2  
Appendix A. How to Get Technical Support ..................... A-1  
SG-80 Series  
Introduction  
1-1  
Chapter 1.  
Introduction  
1.1. Features & Specifications  
CPU  
Designed for Intel® 90nm Pentium 4/Celeron D LGA775 Processors  
with 800/533 MHz FSB  
Supports Intel Hyper-Threading Technology  
Chipset  
SIS 661FX/ 964 (L)  
Memory  
Two 184-pin DIMM sockets  
Supports DDR400 non-ECC un-buffered memory  
Supports maximum memory capacity up to 2GB  
Graphic  
Integrated SIS Mirage Graphics GPU high performance 256-bit 3D  
engine and 2D Accelerator  
SATA 150 (Option)  
Serial ATA 1.5Gbps data transfer rate  
Support SW RAID 0/ 1/ JBOD  
LAN  
Onboard 10/100 PHY  
Audio  
On board 5.1 channels Audio CODEC  
Internal I/O Connectors  
1x AGP 8X/4X slot. 3x PCI slots  
1x Floppy Port supports up to 2.88MB  
2x Ultra DMA 133/100/66/33 Connectors  
2x Serial ATA 1.5Gbps Connectors (Option)  
2x USB 2.0 headers (Each header support two USB 2.0 devices)  
1x FP-Audio header, 1 x CD-IN, 1 x AUX-IN  
User’s Manual  
1-2  
Chapter 1  
Back Panel I/O  
1x PS/2 Keyboard, 1x PS/2 Mouse  
1x Serial Port, 1x Parallel Port, 1x VGA connector  
4x USB 2.0, 1x RJ-45 LAN Connector  
1x Audio connectors (Line-out, Line-in, MIC-in)  
Miscellaneous  
Micro ATX form factor (244mm x 244mm)  
Product List  
Model  
Chipset  
SIS 661FX + 964  
SIS 661FX + 964L  
Features  
10/100 LAN + SATA  
10/100 LAN  
SG-80  
SG-81  
All brand names and trademarks are the property of their respective  
owners.  
This motherboard is customized for certain system configurations; and  
may not fit system integration in all DIY ways. Before integrating this  
product, please check ABIT web site for recommended device listings, or  
contact sales/tech. support people.  
Specifications and information contained herein are subject to change  
without notice.  
SG-80 Series